1999 Dodge Durango Slt Plus Sport Utility 4-door 5.2l on 2040-cars

Auto blog

Hellcrate 6.2-liter V8 delivers plug-and-play Hellcat hype to SEMA

SEMA just provided another entry for the folder marked "What A Time To Be Alive," with Mopar's announcement of the "Hellcrate" 6.2-liter supercharged Crate HEMI engine. Enthusiasts have been desperate to upgrade their vintage rides with the woozy thrills provided by Dodge's Hellcat motor, so Mopar answered. The Hellcrate engine assembly ships in plug-and-play configuration, in specially designed packaging with "Hellcrate" logos. The assembly sells separately from the Hellcrate engine kit, the kit adding a powertrain control module, power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. The PCM comes programmed with the production-car engine's 707 horsepower and 650 pound-feet of torque. An optional front-end accessory drive kit contributes peripherals like alternator, power steering pump, belts, and pulleys. Don't bother trying to lash up a sleeper 1997 Chrysler Sebring, though; Mopar tuned the Hellcrate for pre-1976 vehicles and manual transmissions. The engine assembly retails for an MSRP of $19,530, and the kit wants a further $2,195. Mopar didn't announce pricing for the accessory drive kit. The engine and kit come with a three-year, unlimited-mileage warranty when bought together. The Mopar Hemi Crate website will be happy to take your orders as of now. For help envisioning the possibilities, stop by Fiat Chrysler's 15,345-square-foot SEMA booth to check out the Limelight Green, Hellcrate-powered 1970 Plymouth Superbird clone worked up by Mark Worman of Velocity's " Graveyard Carz." While you're there you might as well peep Worman's encore, a 1968 Plymouth GTX stuffed with Mopar's 392 Crate HEMI in place of the original 440 big block, and the 1937 Dodge pickup that swallowed a Mopar 345 Crate HEMI. Mopar's come a long way from its original product: antifreeze products. Tomorrow it'll be Jeep's turn to ring the SEMA bells, once the noise dies down from the Mopar-jacked Wrangler Switchback, CJ66 and Jeep Shortcut. You can watch the brand's presentation online at 7:26 p.m. ET/4:26 p.m. PT. Until then, we're going to work the angles on a Hellcrate-powered Plymouth Volare. The sedan, naturally. Because we're practical. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Dodge could resurrect the ACR nameplate on a track-hungry Challenger

Dodge will reportedly celebrate the Challenger's 50th birthday by introducing a track-focused variant of the coupe that will resurrect the American Club Racer (ACR) nameplate. It will arrive as a cocktail of the automaker's best race-bred parts, including bits and pieces sourced from the defunct Viper. The Challenger ACR will be presented as a follow-up to the sold-out Challenger Demon available during the 2018 model year. While Dodge developed the 840-horsepower Demon for drag racing, it's designing the ACR to tackle America's windiest road courses, according to anonymous sources who spoke to website Mopar Insiders. It will need to take a turn, not just go really fast in a straight line. To that end, Dodge will give its popular muscle car more downforce by adding a full body kit that will include a huge adjustable rear wing shaped like the one fitted to the Viper ACR. The racer will be based on the Widebody variant of the Challenger, which handles considerably better than its narrow-bodied sibling, and it will rely on composite materials like carbon fiber to keep weight in check. In other words, it will receive more extreme modifications than the Challenger SRT8 ACR that Dodge introduced during the 2011 SEMA show but never approved for production. If this configuration sounds familiar, it's likely because the carmaker sponsors an independent team named Wesley Motorsports, which races a Hellcat Redeye all over America. It features an adjustable suspension provided by Blistein, slick Toyo tires, and a supercharged, 797-horsepower V8. The Challenger ACR described by Mopar Insiders sounds a lot like the one Wesley Motorsports regularly enters in hill climbs and time attack competitions (pictured). Coincidence? It's too early to tell for sure. Dodge hasn't commented on the report, and it hasn't announced what it has in store for the Challenger's 50th anniversary. The original Challenger made its debut in late 1969, and it arrived in showrooms during the 1970 model year, so Dodge will need to unwrap its surprise before the start of the 2021 model year to keep it timely. Expect an announcement during the first half of 2020. While pricing information remains a mystery, Mopar Insiders added the Challenger ACR will come standard with only a driver's sat. Buyers will be able to add a passenger seat for $1.