1998 Dodge Durango Base Sport Utility 4-door 5.2l on 2040-cars

Auto blog

FCA's large, LX-based RWD cars will stick around until 2020

Fiat Chrysler Automobiles plans to stick with the Dodge Challenger, Dodge Charger, and Chrysler 300 until at least 2020, reports Automotive News. The information comes from two unnamed sources and was loosely confirmed by details in the automaker's new labor contract with Unifor, Canada's auto union. The plan, according to two anonymous sources, is to lightly refresh the Challenger, Charger, and 300 until the vehicles make the switch to FCA's new Giorgio platform. The refresh, as Automotive News points out, will happen in 2018. The Giorgio platform currently underpins the Alfa Romeo Giulia and is expected to find its way to two of the three large American vehicles for the 2021 model year. At that time, FCA will discontinue either the Charger or the 300, claim AN's unnamed sources. If one of the vehicles were to go, it would most likely be the 300. The 300's LX platform would be approximately 15 years old in 2020 and the vehicle doesn't draw in as many sales as the Challenger or the Charger. The Charger made the switch from the LX platform in 2010 with the current model utilizing the mildly updated LD platform, while the Challenger recently moved from the LC platform to the LA platform last year. All of those rear-wheel-drive platforms are closely related. Automotive News points out that FCA CEO Sergio Marchionne stated that the new platform could be utilized across various applications in a conference call with analysts last month. The plan, according to the report, is to stretch and widen the Giorgio platform for the next-gen Challenger and Charger. The new platform is also rigid enough to allow the automaker to add a convertible to its lineup, which could lend further credence to rumors of an upcoming Barracuda. Hopefully, the move to the new Giorgio platform doesn't delay the all-wheel-drive Challenger GT AWD or the wide-body, Hellcat-powered Challenger ADR. We'll just have to wait and see. Related Video: News Source: Automotive News - sub. req. Chrysler Dodge Coupe Performance Sedan FCA fiat chrysler automobiles

Follow along for the 2018 Dodge Challenger SRT Demon live reveal

Updates: Live Demon premiere in Times Square and a viewing party on Woodward Ave. here in Detroit. The first Hellcat sold for about $800k at a Barrett-Jackson auction. New Pennzoil video with the last Dodge Viper premiering tomorrow. "Making the suits nervous is how we know we're on the right track." No love for accountants. "A modern day version of the Ramchargers." "The harder car companies work to take the driver out of the equation, the harder we work to keep them in." "We want to impress the NHRA more than the PTA." "It would have been easy to take a Hellcat and make it a bit faster." SRT says tuners have it all wrong. This is the way to build a performance drag car. Every Demon comes with a leather-bound manual that shows how to properly set up the car for tracks. 2.3 seconds to 60 mph 9.65 second 1/4 mile 840 horsepower This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Original Post: The 2018 Dodge Challenger SRT Demon is coming tonight, and we'll be bringing you live coverage and updates from New York. There have been months of teasers, trailers, and hints, but some of the big questions have yet to be answered. Dodge is showing the reveal live on the Demon's promo site, ifyouknowyouknow.com. Watch the stream and follow along here for the latest Demon info. The hype started back in January with the first video, "Cage." At the time, all we knew was that the Demon was going to be a hopped-up version of the already juiced up Dodge Challenger SRT Hellcat. After that, we learned that the Demon would be significantly lighter thanks to optional - yes, optional - passenger and rear seats. In addition to the seats, the Demon comes with lightweight wheels wrapped in sticky 315/40R18 Nitto drag radials at all four corners. Dodge showed off the Demon's crate of goodies, but it was a few more weeks before we learned what was inside. The Demon comes with a jack, an electric impact wrench, torque wrench, and a tire pressure gauge. The kit will be used to swap skinny front tires for use on a drag strip. As cool as those 315 section tires look up front, they hurt far more than they help on a drag strip.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.