Demon Race Car Racecar Drag Project Solid Chassis Hot Rat Rod Restomod on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

No wing, no Hemi. This Dodge Charger Daytona is two-tone and tufted

In between the Dodge Charger Daytona's 1969 debut as a wild, winged NASCAR warrior and the current 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition with its monster 717-hp Hemi V8, the nameplate had some ... less-glorious years. The nameplate first resurfaced in 1975, when the Charger moved into the "personal luxury" space as a riff on the Chrysler Cordoba. This 1975 Charger Daytona might not be the model's heyday, but damn if this clean machine, surfaced by Barnfinds.com, isn't striking in its own Me Decade kind of way. And this low-miles example is on offer right now on eBay motors. Outside, this dynamic Dodge sports two-tone silver and blue paint, alloy wheels with white-letter tires, and a power sunroof. Inside, we find high-backed split-bench seats with button-tufted vinyl (no "rich Corinthian leather" here). Raising the miles-long hood reveals a 400-cubic-inch, 4-bbl V8, which for 1975 packed 190 horsepower. A far cry from today's 717 horses, perhaps, but still an upgrade over the Charger's standard 360-cubic-inch V8. It may not be the car that pops immediately to mind when someone says, "Charger Daytona," but with less than 12,000 miles showing, this mid-Seventies example is a time warp to a lesser-known era for the marque.   Featured Gallery 1975 Dodge Charger Daytona Dodge Coupe Classics

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat