2014 Dodge Dart Gt on 2040-cars

Auto blog

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Dodge Challenger Shaker cars get Shakedown package stripes

In 2016, Dodge brought a custom 1971 Dodge Challenger to the SEMA show called the Shakedown. It melded modern Challenger parts with the classic model's body, and did so almost seamlessly. It of course featured a shaker hood scoop, and it also had a set of stripes to one side that gradually decreased in size to give the feeling of vibration and movement. The reception was clearly good, because Dodge has created a set of stripes just like those on the show car for modern shaker Challengers and made them available in a package with the Shakedown name. The Shakedown package is new for 2018 and available only on Challengers with the shaker hood scoop. These include the R/T Shaker, R/T Plus Shaker, and 392 Scat Pack Shaker. Just like on the concept, the stripes are all to one side and wrap around the hood scoop. The only difference is that they're all one color, whereas the '71 custom car had one stripe in red. In addition to the stripes, the package adds white-face gauges and an upgraded Alpine audio system. On R/T and R/T Plus models, this system has six speakers with a 275-watt amplifier, while the system on the Scat Pack has nine speakers with a 506-watt amplifier. The cost of the Shakedown package is $995, and it's available with any color of Challenger Shaker. And on the topic of colors, Dodge has also revived Plum Crazy and B5 Blue for 2018 Chargers and Challengers. Those colors will be available on any Charger or Challenger regardless of trim level. Related Video: Dodge Coupe Performance