2014 Dodge Dart Gt on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Before Jay Leno, this 1970 Dodge Charger was a SEMA star

When Jay Leno drives an awesome car, enthusiasts take note, and this week the internet blew up over the 1970 Dodge Charger resto-mod that starred in a recent Garage episode. But you might not remember: this strapping Charger, called "Tantrum," was one of the highlights of the SEMA Show in Las Vegas last fall. Here's another look at a true Mopar monster. The power: Yep, Tantrum has 1,650 horsepower. That's more than two Hellcats worth of power under the hood. It's a twin-turbo 9.0-liter Mercury Racing engine with a quad-cam four-valve setup. Basically, it's a V8 boat motor developed for cars. Mercury Marine is the crew that developed the V8 for the 1990s Chevy Corvette ZR-1. That all-aluminum LT-5 under the hood cranked out 405 hp – an astronomical figure for the time – and helped make the ZR-1 an icon. Take a listen to Tantrum's 9.0-liter Mercury mill below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Who's behind all of this? SpeedKore, a Wisconsin-based performance shop that does one-off pro touring builds. It specializes in remaking Detroit muscle with modern features like carbon fiber, bespoke interiors, and powerful engines. SpeedKore is pretty good at it. Before it threw a Tantrum, it did the "Cudinator" used in some of the Fast and the Furious movies. You might not know: Tantrum won the Best Domestic category of the GT Awards at SEMA – chosen by your author. The sinister looks were the hook, and the crazy engine solidified its performance cred. Related Video: Image Credit: SpeedKore Design/Style Dodge Coupe Performance Videos Jay Lenos Garage 1970 dodge charger resto mod

Cold start comparison: 2020 Alfa Romeo Giulia Quadrifoglio vs. 2013 Dodge Challenger SRT8

The 2020 Alfa Romeo Giulia Quadrifoglio is a five-seat, compact luxury sport sedan packing 505 horsepower thanks to a 2.9-liter twin-turbocharged V6. My personal 2013 Dodge Challenger SRT8 392 is ... well ... not. It's a full-sized muscle coupe whose iron-block 6.4-liter V8 makes 470 hp in the very traditional way: it's freakin' huge, like everything else about the car.  On paper, these two have nothing in common beyond the fact that they were built by the same multi-national manufacturing entity.  But if paper were the be-all and end-all of automotive rankings, everybody would buy the same car. And we don't, especially as enthusiasts. Whether it's looks or tuning or vague "intangibles" or something as simple as the way a car sounds, we often put a priority on the things that trigger our emotions rather than setting out to simply buy whatever the "best" car is at that particular moment.  So, what do these two have in common? They both sound really, really good. Like looks, sounds are subjective. While a rubric most assuredly exists in the world of marketing (attraction is as much a science as any other human response), we have no way of objectively scoring the beauty of either of these cars, and the same applies to the qualities of the sound waves being emitted through their tail pipes.  But we can measure how loud they are. In fact, there's even an app for that. Dozens, as it turns out. So, I picked one at random that recorded peak loudness levels, and set off to conduct an entirely pointless and only vaguely scientific experiment with the two cars that happened to be in my garage at the same time.  For the test, I opened up a window and cracked the garage door (so as not to inflict carbon monoxide poisoning upon myself in the name of discovery), and then placed my phone on a tripod behind the center of each car's trunk lid. I fired each one up and let the app do the rest. I then placed my GoPro on top of the trunk for each test so that I could review the video afterward for any anomalies.  I started with the Challenger. The 6.4-liter Hemi under the hood of this big coupe is essentially the same lump found under the hood of quite a few Ram pickups, and it has the accessories to prove it. Its starter is loud and distinctive. Almost as loud, it turns out, as the exhaust itself. As its loud pew-pew faded behind the V8's barking cold start, we recorded a peak of 83.7 decibels. In the app's judgment, that's roughly the equivalent of a busy street.