2013 Dodge Dart Sxt/rallye Sedan Premium Repairable Rebuilder Easy Fix on 2040-cars

Auto blog

Watch Atieva's electric van outrun a BMW i8 and Dodge Viper

A little while back, automotive startup Atieva drag raced its electric van, called Edna, against a Tesla Model S and a Ferrari California in order to compare its performance against known and revered mechanical athletes. Again, the Silicon Valley-based company is putting its prototype up against electrified and conventionally powered performance vehicles on the drag strip. Last time around, Edna, the Mercedes-Benz Vito van equipped with a 900-horsepower, all-wheel-drive powertrain, bested both of its foes. In that showcase, Edna was hitting 60 mph in a little over three seconds. Comparatively, BMW lists the i8's 0-60 time at 4.2 seconds, though Road & Track clocked it at 3.8 seconds, with a quarter-mile time of 12.3 seconds. The Viper does 0-60 in 3.4 seconds. Before you even watch the video above, you can imagine how it will end, as the retuned Atieva Edna rips 0-60 mph in 2.94 seconds. Atieva clocked the quarter mile at 11.3 seconds at 117 mph. It's worth noting that driver skill can have a lot to do with a car's straight-line performance. We've witnessed Viper's elapsing the quarter mile in well under 12 seconds, which means it should be quicker in this test than the i8, if not the Edna. Still, the performance showcased in the video is exceptional. To improve Edna's stats, Atieva says it has used testing data to fine tune its AC induction motors at higher speeds once it got low-speed performance locked in. After testing in the hot California sun, including the race you see above, Atieva drove Edna 90 miles home with range to spare. As for production plans, Atieva will put this powertrain into a sedan slated for sale in 2018. In the meantime, the company will keep testing and tuning its working prototype, and has even invited the public to put their cars up against Edna in future sessions. Related Video: Related Gallery 2015 BMW i8 in Petoskey, MI News Source: Atieva, YouTube: Atieva via Electrek Green Motorsports BMW Dodge Automakers Electric Future Vehicles Videos drag race atieva

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.