Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Doge Dart Swinger 2 Door Auto Factory Air Car Project Car on 2040-cars

Year:1970 Mileage:93192
Location:

Fort Payne, Alabama, United States

Fort Payne, Alabama, United States
Advertising:

This auction is for a 1970 Dodge Dart Swinger 2 door slant six automatic car with factory air.As far as i know this is a matching number car from what the previous owner told me.This car could be built back original or drop a 340-360-440 or a good stroker engine down in it & make a great pro street or drag car.It still has the motor & trans in it.I have the air compressor & under dash unit for the car it still has both front & rear bench seats & is a auto on the column.Floor pans are good,trunk pan is in good shape,there is some rust in both sides of the top were the vinyle top came off & it had been sitting for years,& would need a small patch panel behind the rear drivers tire.The car is green & the interior is also green.The car is in Fort Payne Alabama 35967 being sold as is were is with a written bill of sale & will need to be picked up & paid for with cash.If you have any questions just ask & i will answer them the best that i can! 256-845-0385 if not home leave a message & i will get back with you.Good Luck Bidding!!!!!!!!!!

Auto Services in Alabama

Tucker Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 435 Prophecy Ln, Springville
Phone: (205) 907-4083

Stephenson Tire & Alignment Inc ★★★★★

Auto Repair & Service, Tire Dealers, Wheel Alignment-Frame & Axle Servicing-Automotive
Address: 1954 Florence Blvd, Florence
Phone: (256) 767-4113

Southside Automotive ★★★★★

Auto Repair & Service
Address: 2806 Dartmouth Ave, Midfield
Phone: (205) 683-1624

Smith`s Transmission ★★★★★

Auto Repair & Service, Auto Transmission, Automobile Consultants
Address: 2514 E Central St, Smiths
Phone: (706) 689-3346

Silverhill Auto Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Tire Dealers
Address: 16125 Silverhill Ave, Silverhill
Phone: (251) 947-3397

Scottsboro Tire & Auto Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 504 S Broad St, Rainsville
Phone: (256) 259-2505

Auto blog

I sold my Viper, but the memories I'll keep

Thu, 30 May 2013

The following is written by auto industry veteran Tow Kowaleski. The words are his own, but the memories now belong to everyone thanks to his willingness to share. If you're an industry veteran with a story to share, contact us at tipsATautoblogDOTcom.
It became the flame that started the fire of belief in the next life of Chrysler.
I just sold a car. Nothing new. Millions do it every day. But my car was a 1995 Dodge Viper, so maybe it was a bit more unique since just 12,000 were built. And like others selling a car that's been a part of the family for close to 20 years, this was a confluence of emotions for me. I was sad to see it go, but happy to have the cash and one less big, shiny, under-utilized object in my life.

FCA registers 'Cuda' trademark, but we wouldn't get our hopes up

Fri, Jun 23 2017

It seems Chrysler has submitted a trademark with the US Patent and Trademark Office for the name "Cuda," as first reported by Motor1. Fans of Mopar will instantly recognize this as the abbreviated name of Plymouth's classic Barracuda muscle car, which occasionally bared the shortened nomenclature. Though this might seem like a sign that FCA is considering a revival of the beloved machine, we wouldn't get our hopes up. See, rumors of a 'Cuda or Barracuda revival have circulated pretty much since the moment Dodge showed the modern Challenger and when it went on sale. And some of those rumors have involved the re-registering of the 'Cuda trademark, even as far back as 2010. Over the years, each rumor died a quiet death as time went on and no 'Cudas appeared on dealer lots. There is one rumor that's recent enough to still have a slim chance of realization, circa 2015 to be exact. It predicts a smaller Challenger-based car called Barracuda that could appear as a Dodge in both coupe and drop-top versions. However, we doubt it will come true, since FCA doesn't exactly have a large development budget, and we're not sure what the company would have to gain by making another sports car to sell below the Challenger. Odds are, it would cannibalize sales from the older, completely developed, and thus more profitable Challenger. Really, this trademark filing is probably just a defensive move for Chrysler. It will ensure that no one else can slip in and snag the name for their own vehicle. It should also help ensure that Chrysler has the rights to use the name on other products such as memorabilia. Sorry to crush your dreams. Related Video: News Source: US Patent and Trademark Office via Motor1Image Credit: Chrysler Rumormill Chrysler Dodge Coupe Performance hemi cuda

The last time Dodge recycled the Demon name, it was for a Miata fighter

Fri, Jan 20 2017

We and the rest of the automotive world are eagerly awaiting the reveal of the Dodge Challenger Demon. And why wouldn't we be? It's going to be a Hellcat, but with less weight, bigger fenders, more performance, and more Vin Diesel. This isn't the first time we've been excited about a Demon from Dodge, though. Ten years ago, Dodge had another demonic car, but it was very different from the new one. The Demon of 2007 was a lithe little roadster that looked primed and ready to take on the Miata, as well as the now-departed Solstice and Sky twins. The Demon was just under an inch shorter than the MX-5 and the Solstice, and it packed a 172 horsepower 2.4-liter four-cylinder that fell right between the Miata's 170 and the Solstice's 177 outputs. Dodge's estimated the curb weight, which for a concept is largely theoretical, also slotted between the two cars at 2600 pounds. That was about 150 more than the Mazda, and about 200 less than the Pontiac. The pitch perfect specifications were presented in a crisp two-seat roadster wrapper. In many ways, it looked like a baby Viper, with a menacing crosshair grille, slanted headlights, and fat rear fenders. The Demon's line's were brutally simple and geometric, too. They didn't seem far removed from the first-generation Audi TT. The interior was also plain and simple. The key highlights were a horizontal aluminum accent that ran the width of the dash, echoed by an aluminum-covered center console. The instrument cluster was uncluttered, with just four gauges, and the only controls were some climate knobs, a double-DIN head unit, and a six-speed manual. It turns out that the 2007 Demon didn't drive very well, though. You see, we actually drove this concept back in the day, and like many concepts, it still had a long way to go to be production ready. The gearbox would grind, the ride quality was terrible. However, the interior was roomy, and the engine sounded suitably grumbly, if a bit coarse. At the time, we said Dodge should absolutely build the little roadster. In retrospect, the company probably made the right decision not to invest in the Demon. The small rear drive sports car segment was, and still is, an extremely niche market. It would have been a big investment for little return, something FCA today is trying to avoid. This is all before taking into account the fact that the recession was just around the corner. In the end, we can't be too sad though.