1968 Dodge Dart 340 V8 4-speed on 2040-cars

Auto blog

Dodge pumps power to the people with $10 discount per horsepower

Dodge announced an incentive program named Power Dollars, which represents the next step in its mission to bring horsepower to the people. Starting on August 1, the automaker is luring enthusiasts into its showrooms by offering a $10 per horsepower discount on select models. The Power Dollars program applies to the 2019 Challenger (pictured), the 2019 Charger and the 2019 Durango. It's as simple as it sounds: if you buy a 500-horsepower car, you benefit from a $5,000 discount. The more horsepower you choose to put in your garage, the more money you save when you sign the dotted line. The 797-horsepower Challenger Hellcat Redeye comes with a $7,970 discount. At the other end of the spectrum, the Charger SXT powered by a 3.6-liter V6 rated at 292 horsepower is eligible for a $2,920 rebate.  The Grand Caravan has 283 horsepower, so it's not far from the Charger SXT, but it's not included in the program. The Journey with the same 3.6-liter V6 engine isn't in it, either. Dodge launched the Power Dollars program to boost sales, and likely to clear the remaining 2019 models out of its inventory before the 2020s arrive. But the company has another reason to make its muscle cars cheaper, one we don't think we've heard from an automaker yet. "Since bringing the Charger and the Challenger back to the market, Dodge has put 485 million horsepower into the hands of our loyal enthusiasts. The goal is to grow to a half-billion horsepower before the end of the year," explained Tim Kuniskis, the global head of Alfa Romeo, and FCA's head of passenger cars in North America, in a statement. It's 15 million horsepower short of the milestone. It needs to sell about 18,820 examples of the Hellcat Redeye to reach its goal, or approximately 51,370 units of the Charger SXT.   

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.