1964 Dodge Dart Gt Convertible Rust-free Survivor Isn't Plymouth 340 318 Or Hemi on 2040-cars

Auto blog

2020 Dodge Charger pricing starts at $31,390

We've been talking about the 2020 Dodge Charger for three months, and it's finally time to start doing the math on trade-in values and loan payments. The 2020 Charger lineup starts with the SXT in rear-wheel-drive trim priced at $29,895, plus a $1,495 destination charge for a total of $31,390. That's a $425 bump over the 2019 model. The rest of the range doesn't get a price bump higher than $250 save for the Hellcat Widebody. The 2019 Charger didn't offer Widebody variants, so those are new for 2020. The lineup with MSRP changes from 2019: Charger GT RWD $33,390 ($150 more than 2019) Charger SXT AWD $35,090 ($25 more) Charger R/T $37,890 ($150 more) Charger Scat Pack $41,490 ($250 less) Charger Scat Pack Widebody $47,490 (brand new model) Charger SRT Hellcat Widebody $71,140 ($2,150 more than 2019 non-widebody) Daytona 50th Anniversary Edition $75,635 (brand new model) There's a price differential of $44,245 from bottom to top. Even more relevant to the Charger faithful, there's a displacement and power differential from the 3.6-liter Pentastar V6 in the SXT with 292 horsepower and 260 pound-feet of torque to the 6.2-liter supercharged Hemi V8 in the Charger Hellcat Widebody Daytona 50th Anniversary Edition with 717 hp and 650 lb-ft of torque. Dodge plumps the Scat Pack in the middle as having the "most horsepower per dollar," with its 392-cubic-inch Hemi V8 pumping 485 hp and 475 lb-ft. In the amusement park business, this is what's called "Fun for everyone." The Scat Pack Widebody makes a break from its standard sibling with stiffer springs, larger sway bars, and shocks, and retuned dampers. Changes throughout the rest of the lineup save for the SXT center on new wheel and tire options, and an updated Performance Handling Group on the GT and R/T trims. The 2020 Charger order book opens in the fall, but America's family-friendly muscle car won't start hitting dealer lots until early 2020.

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Watch dual-engined Dodge SRT4 do a FWD burnout, a RWD burnout, then AWD launch

There's something fantastically insane about racers who go out on their own and build something unique. Just take this crazy video from last year of a twin-engine Dodge SRT4 at a drag strip that can burn the rubber at either end – or both ends – at a moment's notice. With tires sticking out way past the fenders, a massive cooling system at the front and no back window to speak of, this Dodge is clearly meant solely for speed. Though it's real party trick is being able to spin the front or rear wheels independently. The setup makes for three quite showy burnouts. When it came time to actually get down the track, things got somewhat awkward. Like other twin-engine creations we've seen, the separate powertrains make for some odd sounds and a weird look launching down the strip. Still, there's no doubt that the engineering behind this Frankenstein is very impressive. Scroll down to see this monster in action and another of it in a very mismatched race last year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.