2003 Dodge Dakota Sxt 4x4 3.9l V6 Magnum *** Only 2 Owners *** ! on 2040-cars

Auto blog

Weekly Recap: Things you might not know about the 2015 Dodge Charger and Challenger Hellcats

If you're an enthusiast, and you don't know that Dodge spawned another Hellcat this week, you really must have been living in cave. The 2015 Dodge Charger SRT Hellcat is probably the biggest news for enthusiasts since the reveal of, well the 2015 Dodge Challenger SRT Hellcat.
But, there are some things you might not know or might have missed about the new Charger and Challenger Hellcats. For starters, reports that the Hellcat production would be limited to a low volume are not true.
"We have not capped the Hellcat on either the Challenger or the Charger," Dodge CEO Tim Kuniskis said.

2023 J.D. Power APEAL Study shows new-car customer satisfaction scores slip

J.D. Power survey results have been slightly up but mostly down for automakers this year, literally. In February, the 2023 Vehicle Dependability Study showed an overall decline compared the 2022 a month before the Customer Service Index Study did the same. The trend reversed in June with a better overall score on the 2023 U.S. Electric Vehicle Consideration Study than in 2022, then declined again the same month on with a lower overall score on the 2023 Initial Quality Study. The declines continue with the 2023 J.D. Power U.S. Automotive Performance, Execution and Layout (APEAL) Study, overall satisfaction among the 84,555 respondents down two points overall compared to 2022, to 845 out of 1,000 points. Because last year's score dropped compared to 2021, this year marks the first consecutive decline in the study's 28-year history. The study tries to "[measure] owners' emotional attachment and level of excitement with new vehicle" after 90 days of ownership by asking new owners to rate 37 attributes in 10 areas around the vehicle, such as the feeling they get when they hit the accelerator. Satisfaction with nine of the attributes is down this year versus last, fuel economy the only segment to show better results with 15 points more satisfaction. Styling and infotainment are big drags on satisfaction. Responses to new car exterior looks tallied 888 points, down from 894 last year, the largest drop in this year's study. On the digital side, less than half of those surveyed this year said they prefer using a manufacturer's built-in infotainment. From 70% of respondents in 2020 preferring to use a manufacturer's in-house software to play audio instead of Android Auto or Apple CarPlay, that's 56% in 2023. Going all-in on Google appears to have the best effect. J.D. Power said that vehicles with both Google's Android Automotive Operating System (AAOS) and Google Automotive Services (GAS) "score higher in the infotainment category than those with no AAOS whatsoever. AAOS without GAS receives the lowest scores for infotainment of the three categories."  Frank Hanley, senior director of auto benchmarking at J.D. Power, said, "Despite the technology and design innovations that manufacturers put into new vehicles, owners are lukewarm about them. While innovations like charging pads, vehicle apps and advanced audio features should enhance an owner’s experience, this is not the case when problems are experienced.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat