2002 Dodge Dakota 5.9l R/t Extended Cab Lowered Suspension Very Fast Cold Air on 2040-cars

Auto blog

A Mazda Miata with a Hellcat V8 exists, and it can be yours

Mazda Miatas with V8 swaps aren't unusual. Kits are available to drop in LS V8s from GM, and some even let you drop in an old Ford 5.0-liter V8. But a Miata with a Hellcat V8 is something special, and this one can be yours. As Automobile spotted, it will go across the block at the Barrett-Jackson Las Vegas auction. This particular 1999 Miata has a build history you can check out for yourself, too. It was all chronicled on YouTube channel KARR. Obviously the Hellcat engine does fit between the wheels, but the hood had to be cut open for the intake manifold and supercharger to fit. The front bumper and lights have been changed to the 2001+ NB Miata design. According to the listing, it has suspension components from V8 Roadsters, a company that specializes in Miatas with twice the normal number of cylinders. In the middle of the car is a manual transmission, which connects to a Ford 8.8-inch differential that's been welded up. With that much power and an essentially locked rear diff, it should make for an excellent drift car. Fortunately it also has 10-inch wide wheels for more grip, and upgraded Wilwood brakes to stop it. It will go for auction at Barrett-Jackson's Las Vegas event, which runs Oct. 3-5. There is no estimated price for the car, which is understandable since nothing like it has crossed the block before. It will go to a new owner, whatever the price, as it is being listed as "no reserve." So if you want to win burnout contests or get loads of stares at next year's Woodward Dream Cruise, you could do a lot worse than picking up this tiny monster. Aftermarket Dodge Mazda Convertible Performance Hellcat

Jay Leno drives a 1970 Dodge Charger with 1,650 horsepower

When Jay Leno says a vehicle might have too much horsepower, he's got our attention piqued. That's exactly what he thinks about the 1970 Dodge Charger Tantrum from Wisconsin-based SpeedKore Performance. While it still looks like a classic muscle car, the front end now features a carbon fiber hood and fenders. Underneath the lightweight parts, there's a twin-turbo, 9.0-liter Mercury Marine offshore boat racing engine with an astonishing 1,650 horsepower, or an only slightly less asinine 1,350 hp on pump gas. Jay is very mechanically intrigued by the Charger at the beginning of this video, and puts it on the lift to take a look at the underside. The engine plumbing is a thing of beauty, and the mill packs a massive radiator and intercooler to keep things running cool. Leno's drive in the Tantrum is especially interesting. The beastly engine is difficult to control, and anything above half throttle in most gears can spin the rear tires. The significant turbo lag also makes the power unpredictable. When Jay finally finds a straight piece of road, he puts the hammer down and rockets into the distance. And, of course, you know Jay's not going to end the video without some suitably smoking tires. Related Video:

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video: