2001 Dodge Dakota Sport Extended Cab Pickup 2-door 3.9l on 2040-cars

Auto blog

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video:

Junkyard Gem: 1988 Dodge Aries America LE Station Wagon

During the late 1970s, Chrysler appeared doomed as outdated car designs and a second catastrophic oil crisis caused by Middle Eastern conflict hammered sales. Chrysler had some successful economy cars made by Mitsubishi or based on Simca designs, but the need for an efficient, modern front-wheel-drive platform grew desperate. After a government bailout in 1979 bought some time, CEO Lee Iacocca masterminded the creation of the all-new K Platform, which hit showrooms for the 1981 model year. The first two K-Cars, the Plymouth Reliant and Dodge Aries, were big sales successes, and Chrysler went on building vehicles based on the platform through 1995. Here's an example of the later Aries wagon, found in a Phoenix self-service wrecking yard. The "true" K-Cars were the Aries, the Plymouth Reliant, the Chrysler LeBaron, and the Dodge 400. They have become very rare in wrecking yards today, so I honor their historical significance by documenting the ones I find. During my junkyard expeditions, I have photographed this '81 Aries wagon, this '81 Reliant wagon, this '82 Aries wagon, this '82 400 coupe, this '82 LeBaron convertible, this '83 Aries sedan, this '83 LeBaron Town & Country wagon, this '85 LeBaron woodie convertible, this '86 Aries sedan, this '86 LeBaron Town & Country wagon, this '86 Reliant wagon, and this '89 Reliant coupe. The early K-Cars could be purchased with optional Mitsubishi Astron 2.6-liter four-cylinder (complete with "HEMI 2.6" badging), but in 1988, the choices were down to a 93-horsepower 2.2-liter Chrysler-built four-cylinder or a 2.5-liter version of the same engine rated at 96 horses and 13 extra pound-feet of torque. This car has the 2.2. The "America LE" trim level was the only one available for the 1988 Aries, and it resulted in a fairly Spartan car. Tough, scratchy cloth upholstery and lots of hard plastic were the order of the day. The MSRP on this car started at $7,695, or about $16,770 in 2018 dollars. That's a lot of car for that kind of money. For comparison, the rear-wheel-drive (and much bigger) 1988 Pontiac Safari wagon went for nearly twice that price. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. By 1988, the Aries wagon was looking pretty old, but it was a bargain.

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance