2001 Dodge Dakota Base Extended Cab Pickup 2-door 4.7l on 2040-cars

Auto blog

Stellantis wants to trim 3,500 hourly U.S. jobs, UAW says

WASHINGTON — Chrysler-parent Stellantis NV wants to cut approximately 3,500 hourly U.S. jobs and is offering voluntary exit packages, according to a United Auto Workers union letter made public Tuesday. The automaker is looking to reduce its hourly workforce offering incentive packages that include $50,000 payments for workers hired before 2007, UAW Local 1264 said in a letter dated Monday posted on its Facebook page. Stellantis spokeswoman Jodi Tinson declined to comment. A person briefed on the matter said the figure might be lower than the figure cited in the UAW letter. In late February, Stellantis indefinitely halted operations at an assembly plant in Illinois, citing rising costs of electric vehicle production. The action impacted about 1,350 workers at the Belvidere, Illinois, plant that built the Jeep Cherokee SUV and resulted in indefinite layoffs. The automaker has warned it may not resume operations as it considers other options. The UAW letter said openings created by workers leaving would be filled by workers on indefinite layoff. Stellantis said in February that about 40,000 U.S. hourly workers were eligible for profit sharing. Last week, UAW President Shawn Fain said Stellantis' decision to idle the Illinois plant was "a flat-out violation" of the union's contract with the UAW and is unacceptable. The UAW will enter talks with the Detroit Three before labor contracts expire in mid-September. Earlier this month, General Motors said about 5,000 salaried workers accepted buyouts to leave the automaker. GM CEO Mary Barra said February job cuts of a few hundred jobs and the 5,000 buyouts "provided approximately $1 billion towards" a $2 billion cost cutting target. Ford Motor Co recently announced significant job cuts in Spain, Germany and other parts of Europe and in August said it would cut a total of 3,000 salaried and contract jobs, mostly in North America and India. Hirings/Firings/Layoffs UAW/Unions Chrysler Dodge Fiat Jeep Maserati RAM Stellantis

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video: