65 Coronet 500 Original Real 426 Street Wedge ! Solid Straight Southern Car ! on 2040-cars
Poplar Bluff, Missouri, United States
Body Type:hardtop
Engine:426 street wedge
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Model: Coronet
Trim: 500
Drive Type: auto
Mileage: 45,053
Exterior Color: Blue
Disability Equipped: No
Interior Color: Blue
Warranty: Vehicle does NOT have an existing warranty
barn find !! been in storage for 30 years ! a real 426 street wedge car..very desirable dark blue metallic with 2 tone blue interior ! very solid nice floors and trunk.. will need a couple spots fixed in left front floor ..1 spot on bottom of each front fender..just needs small patches..needs bottom of right 1/4 where it rolls under easy fix,,,..trunk extensions are good..it is a non undercoated car which is a big plus for restoration.. left cowl is probably only thing youll have to buy for patch..this car is in Missouri..has a 426 wedge block included 9-24-64 date and correct 65 casting numbers and 516 heads ..has been tanked and magnufluxed and is good...has no trans.but available. includes block and heads..the rest is the same as 440 etc..easy to build.have engine parts available..has original big yoke drive shaft 7290 and trans crossmember...i have all interior seats console etc.. this is a very rare combo 426 blue and blue.. has 7-15 build date could be one of or the last street wedge built !?..this is a very solid and very straight 65 dodge.. 80 engine code..fender tag has never been off car and yes numbers are in radiator support and rear shelf.has clear title... mice ate build sheet..Chrysler historical should have ibm card info etc...yes it still has all the original heavy duty suspension..11 inch brakes. heavy duty springs and sure grip rear.please call rick at 928-377-0383 for all questions ! car sold strictly as is .. has clear title these cars are extremely hard to find unrestored thanks
On May-16-13 at 16:38:42 PDT, seller added the following information:
this car does NOT need floor pans or trunk panels replaced...only left corner cowl patch and a few small patches..just like all 62-5 b bodys. light surface rust on front floors non undercoated car..trim very decent ..original bucket seats ,rear seats ,and console included,.. will be put back in car before pick up..engine/parts will be safely packed in trunk for pick up thanks rick 928-377-0383 also has very nice magnum 500 wheels and tires from 68 gtx nice chrome tires etc..
Dodge Coronet for Sale
1969 dodge super bee a-12 performance/concurs reproduction
1965 dodge coronet hemi a990 recreation
1959 dodge coronet lancer 2-door hardtop(US $29,500.00)
Rare dodge coronet 500/440(US $7,000.00)
1969 coronet(US $11,900.00)
69rt dodge
Auto Services in Missouri
Xpert Auto Service ★★★★★
Wrench Teach GV ★★★★★
Twin City Toyota ★★★★★
Trux Unlimited Inc ★★★★★
The Tint Shop ★★★★★
The Automotive Shop of Melbourne ★★★★★
Auto blog
Armormax loads a bulletproof Dodge Hellcat AWD Police Special
Fri, Sep 7 2018Earlier, we wrote about the Armormax armored Tesla Model S P100D, which International Armoring Corporation called the fastest armored car in the world. As the company also outfits cars such as Dodge Chargers, it's only logical that the showcase car is a SRT Hellcat — but the interesting thing is that the company can also upgrade the Hellcat to all-wheel drive, as Armormax told Motor Authority. When ordering an armored Charger SRT Hellcat, the AWD implementation is just a matter of ticking the corresponding box. The Armormax Charger SRT Hellcat seen here is also outfitted with police patrol car gear, complete with a push bar, run-flat tires, ballistic bulletproof glass and a mean matte black wrap. Even if the 6.2-liter, supercharged Hellcat powertrain probably has no problem hauling an armored bodyshell around, it's likely that the company has used the same synthetic fiber laminate on the Charger as on the Tesla. The bulletproof Tesla's weight gain was a negligible 11 percent, and while the Charger is a lighter car to begin with, avoiding using regular-issue ballistic steel seems to be the way to go if you want to keep the curb weight in check. The Hellcat's battery, radiator, fuel tank and ECU also get their share of protective covering, so that the vehicle is harder to disable. Paneling is available in ballistic protection levels ranging from B4 (can withstand a .30-caliber lead-core softpoint bullet) to B7 (can withstand a 9mm full-copper jacket). And while pricing isn't announced, it is likely to depend on how much protection is applied on the Hellcat and whether all four wheels are powered. A stock one is priced at $65,345. Related Video:
VW scandal, Alan Taylor on Vipers, and future cars | Autoblog Podcast #474
Fri, Apr 22 2016Episode #473 of the Autoblog Podcast is here. This week, Dan Roth chats with Sam Abuelsamid of Navigant Research about the just-announced deal pending between Volkswagen and the EPA, and Navigant's Transportation Outlook for 2025 to 2050. Alan Taylor, host of The Drive on ERN also visits the Podcast to talk about picking up his Viper ACR in Texas and driving it back to the West Coast. It all starts with the Autoblog Garage - check it out! Check out the rundown with times for topics, and thanks for listening! Autoblog Podcast #474 Topics VW/EPA deal Navigant Research Transportation Outlook Alan Taylor In The Autoblog Garage 2016 Lincoln MKX 2016 Volvo XC90 2016 Jeep Renegade Trailhawk Hosts: Dan Roth Guests: Sam Abuelsamid, Alan Taylor Rundown Intro & Garage - 00:00 VW/EPA - 25:51 Navigant Outlook - 38:47 Alan Taylor - 54:43 Total Duration: 01:13:11 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show in iTunes Podcasts Dodge Volkswagen
That thing got a Hemi? Mopar engine kits make it easier to say yes
Wed, Nov 2 2016Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016