1969 Dodge Coronet R/t - 21,450 Actual Miles - Factory A/c -very Original & Nice on 2040-cars

Auto blog

The Dodge Demon isn't the only way to a 10-second quarter mile

The Demon's rear tires smoke, the front tires lift – and in under ten seconds (after having spent $85,000) you've covered a quarter mile. In short, we fully get the attention shown Dodge's SRT Demonstrator. With disruption the operative word of the times, it's good to see a representative of the movement coming from Detroit. The SRT Demon delivers disruption in spades. There is, however, a viable alternative – and it doesn't require getting on the list at your Dodge dealer. If you want to do 0-60 in under three seconds or the quarter mile in around 10, the folks at Honda, Kawasaki, Suzuki and Yamaha – with any of their one-liter superbikes – have you covered. The gestation of what we now know as the superbike came roughly a decade after the debut of the muscle car. It was in the early '70s, as emission and safety regulations – along with rising insurance premiums – decimated the ranks of Detroit's fastest that motorcycle makers found their magical, almost mystical momentum. Honda's CB750 four was arguably the first, followed soon by Kawasaki's Mach III and Z-1. After that, it was Katie-bar-the-door, with more horsepower offered by Japanese OEMs until, invariably, insurance premiums went higher and, during the last recession, 20-somethings couldn't get affordable loans or insurance. Today, Japan's Big Four are once again engaged in a horsepower war, fueled by the rising interest in MotoGP, along with the rising profits available when selling a $20,000 motorcycle. And if that $20,000 - $10K per wheel – seems high, simple math tells you it's less than half of what you'll spend per corner if buying Dodge's Demon. The specs tell the tale. The Demon, fattened by both its flared fenders and a platform dating from the George Bush administration, supports its 4,200+ pounds on a wheelbase of 116 inches. That's in contrast to Suzuki's GSX-R1000 – redesigned for 2017 – which puts its 443 pounds atop a wheelbase of just 56 inches. To maximize its Hemi-supplied 800+ horsepower, Dodge diverts the air conditioning from the Demon's interior to the engine, which makes racing on a summer evening (you guessed it) devilishly hot. On Suzuki's GSX-R1000 – or similarly-equipped superbikes – almost all of the air at 100+ miles per hour is directed at you. To further underscore the differences, know that the GSX-R1000 and its like-minded competition can turn a quick corner, while the Demon is hard-pressed to execute a U-turn at the end of a quarter-mile straightaway.

China own a Detroit automaker? Would the U.S. let that happen?

The news that several Chinese automakers want to buy Fiat Chrysler Automobiles, and that one has even made an offer, elicits some mixed feelings. On one hand, as some have pointed out, it could be a win-win both for China and for FCA's American workers, ensuring the company's survival and opening new markets. On the other hand, this is China, whose trade relationship with the U.S. is the source of considerable scrutiny from the Trump administration — and whose not-a-friend, not-an-enemy status is particularly difficult to gauge right now during heightened tensions with its client state North Korea. So would such a deal pass regulatory muster? One reason that springs to mind for blocking any sale has to do with national security. Chrysler's role as a military supplier dates back to Dodge trucks used by Gen. Blackjack Pershing to chase Pancho Villa in Mexico, and shortly thereafter by American forces in World War I. The Detroit Three automakers were, of course, mainstays of the Arsenal of Democracy of World War II. Even before U.S. entry into the war in December 1941, America's industrial machinery went into overdrive, and Chrysler was one of the biggest cogs. It engineered and built the M3, Sherman and Pershing tanks and trucks for Gen. George Patton's Redball Express. It helped develop a radar-guided antiaircraft gun that knocked German bombers and V1 rockets out of the sky — on one day, shooting down 97 of 101 V1s headed for London. On D-Day, the radar system helped thwart Luftwaffe counterattacks on the beaches of Normandy, and it later helped Allied forces break out at the Battle of the Bulge. Chrysler redesigned the Wright Cyclone engines used by the Boeing B-29 Superfortress, the plane that firebombed Tokyo and dropped the atomic bombs that ended the war. Chrysler even played a secret role refining uranium in Oak Ridge, Tenn., that was used in the Hiroshima bomb and in the ensuing Cold War arms race. It worked on military missiles and was NASA's prime contractor for the Saturn V rocket that put men on the moon. More recently, Chrysler produced the M1 Abrams tank. And of course Chrysler is the keeper of the flame for Jeep, a 75-plus-years military legacy handed down from Bantam and Willys to Kaiser to AMC to Chrysler. The point of this history lesson is to note that in times of war or national emergency, America's industrial might has been called to serve, and may well be called on again.

Dodge could resurrect the ACR nameplate on a track-hungry Challenger

Dodge will reportedly celebrate the Challenger's 50th birthday by introducing a track-focused variant of the coupe that will resurrect the American Club Racer (ACR) nameplate. It will arrive as a cocktail of the automaker's best race-bred parts, including bits and pieces sourced from the defunct Viper. The Challenger ACR will be presented as a follow-up to the sold-out Challenger Demon available during the 2018 model year. While Dodge developed the 840-horsepower Demon for drag racing, it's designing the ACR to tackle America's windiest road courses, according to anonymous sources who spoke to website Mopar Insiders. It will need to take a turn, not just go really fast in a straight line. To that end, Dodge will give its popular muscle car more downforce by adding a full body kit that will include a huge adjustable rear wing shaped like the one fitted to the Viper ACR. The racer will be based on the Widebody variant of the Challenger, which handles considerably better than its narrow-bodied sibling, and it will rely on composite materials like carbon fiber to keep weight in check. In other words, it will receive more extreme modifications than the Challenger SRT8 ACR that Dodge introduced during the 2011 SEMA show but never approved for production. If this configuration sounds familiar, it's likely because the carmaker sponsors an independent team named Wesley Motorsports, which races a Hellcat Redeye all over America. It features an adjustable suspension provided by Blistein, slick Toyo tires, and a supercharged, 797-horsepower V8. The Challenger ACR described by Mopar Insiders sounds a lot like the one Wesley Motorsports regularly enters in hill climbs and time attack competitions (pictured). Coincidence? It's too early to tell for sure. Dodge hasn't commented on the report, and it hasn't announced what it has in store for the Challenger's 50th anniversary. The original Challenger made its debut in late 1969, and it arrived in showrooms during the 1970 model year, so Dodge will need to unwrap its surprise before the start of the 2021 model year to keep it timely. Expect an announcement during the first half of 2020. While pricing information remains a mystery, Mopar Insiders added the Challenger ACR will come standard with only a driver's sat. Buyers will be able to add a passenger seat for $1.