1965 Dodge Coronet 500 .. 383 Big Block . Bucket Seats.. Must See. on 2040-cars

Auto blog

2015 Dodge Challenger SRT 392

I've just started reading the third installment in a planned five-book biography of Lyndon Baines Johnson, Master of the Senate, written by the incomparable Robert Caro. Conveniently, a recent trip to drive the BMW X6 M and 228i Convertible was to be staged in Austin, TX, within easy driving distance of LBJ's birthplace, Johnson City. And yes, the city is named for his family. Having completed my duties with the Bimmers, I borrowed the spangled 2015 Dodge Challenger SRT 392 you see above, to squire me around the Texas capitol for a weekend, and as a lift out to the Hill Country homestead of our 36th President. Johnson City isn't exactly a road trip mecca, but there's a pretty good brewery, a museum, the reconstructed LBJ house to take snapshots of, and it's a nice drive to get out there if you've got a 485-horsepower muscle car at your disposal. Driving Notes With the heroic Hellcat, this 392 and the R/T Scat Pack (that Brandon Turkus reviewed recently), there are more SRT-treated Challengers to choose from than ever before. There are 707 obvious reasons that the Hellkitty is the top dog (as it were), but there are important difference between this 392 and the Scat Pack, too. Both cars make use of the 6.4-liter Hemi V8 putting out 485 horsepower and 475 pound-feet of torque, but the 392 also gets an adaptive suspension, six-piston Brembo brake calipers (instead of four-piston), wider tires, leather and Alcantara seats, a heated steering wheel, a louder stereo and HID headlights. When LBJ was campaigning for his seat in the House of Representatives, he would've loved to have something as potent as this monster of a V8 under the hood of his canvassing car. The 6.4L snorts with authority before it sends the big coupe forward to just about any speed I'd ask of it, and with a quickness. Johnson was known for haranguing drivers to step on it, when all that stood between himself and a few more votes was the ability to fit one more stump speech into the day. The 392 feels as though it could cover a quarter of the state of Texas in a morning if you throttle down deep enough (faster even than the Johnson City Windmill, I'd guess). Though there's a six-speed manual available, I'm actually quite fond of the eight-speed automatic in the 392. The two-pedal setup better suits the fast-cruiser attitude of the car, and it never served up any poorly conceived shift logic when I left it in D. Of course, the roads are better now than they were in the 1930s and 40s, too.

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric