'69 Dodge Coronet Rt on 2040-cars

Auto blog

8 things you learn while driving a cop car [w/videos]

Let me start off with the obvious: it is absolutely illegal to impersonate a police officer. And now that that's out of the way, I'd just like to say that driving a cop car is really, really cool. Here's the background to this story: Dodge unveiled its redesigned 2015 Charger Pursuit police cruiser, and kindly allowed Autoblog to test it. That meant fellow senior editor Seyth Miersma and I would spend a week with the cop car, and the goal here was to see just how different the behind-the-wheel experience is, from a civilian's point of view. After all, it's not technically a police car – it isn't affiliated with any city, it doesn't say "police" anywhere on it, and it's been fitted with buzzkill-worthy "NOT IN SERVICE" magnets (easily removed for photos, of course). But that meant nothing. As Seyth and I found out after our week of testing, most people can't tell the difference, and the Charger Pursuit commands all the same reactions as any normal cop car would on the road. Here are a few things we noticed during our time as wannabe cops. 1. You Drive In A Bubble On The Highway Forget for a moment that our cruiser was liveried with Dodge markings instead of those of the highway patrol. Ignore the large "NOT IN SERVICE" signs adhered around the car. Something in the lizard brain of just about every licensed driver tells them to hold back when they see any hint of a cop car, or just the silhouette of a light bar on a marked sedan. Hence, when driving on the highway, and especially when one already has some distance from cars forward and aft, a sort of bubble of fear starts to open up around you. Cars just ahead seem very reluctant to pass one another or change lanes much, while those behind wait to move up on you until there's a full herd movement to do so. The effect isn't perfect – which is probably ascribable to the aforementioned giveaways that I'm not really a cop – but it did occur on several occasions during commutes from the office. 2. You Drive In A Pack In The City My commute home from the Autoblog office normally takes anywhere from 25 to 30 minutes, and it's a straight shot down Woodward Avenue from Detroit's north suburbs into the city, where I live. Traffic usually moves at a steady pace, the Michigan-spec "five-over" speed.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Follow along for the 2018 Dodge Challenger SRT Demon live reveal

Updates: Live Demon premiere in Times Square and a viewing party on Woodward Ave. here in Detroit. The first Hellcat sold for about $800k at a Barrett-Jackson auction. New Pennzoil video with the last Dodge Viper premiering tomorrow. "Making the suits nervous is how we know we're on the right track." No love for accountants. "A modern day version of the Ramchargers." "The harder car companies work to take the driver out of the equation, the harder we work to keep them in." "We want to impress the NHRA more than the PTA." "It would have been easy to take a Hellcat and make it a bit faster." SRT says tuners have it all wrong. This is the way to build a performance drag car. Every Demon comes with a leather-bound manual that shows how to properly set up the car for tracks. 2.3 seconds to 60 mph 9.65 second 1/4 mile 840 horsepower This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Original Post: The 2018 Dodge Challenger SRT Demon is coming tonight, and we'll be bringing you live coverage and updates from New York. There have been months of teasers, trailers, and hints, but some of the big questions have yet to be answered. Dodge is showing the reveal live on the Demon's promo site, ifyouknowyouknow.com. Watch the stream and follow along here for the latest Demon info. The hype started back in January with the first video, "Cage." At the time, all we knew was that the Demon was going to be a hopped-up version of the already juiced up Dodge Challenger SRT Hellcat. After that, we learned that the Demon would be significantly lighter thanks to optional - yes, optional - passenger and rear seats. In addition to the seats, the Demon comes with lightweight wheels wrapped in sticky 315/40R18 Nitto drag radials at all four corners. Dodge showed off the Demon's crate of goodies, but it was a few more weeks before we learned what was inside. The Demon comes with a jack, an electric impact wrench, torque wrench, and a tire pressure gauge. The kit will be used to swap skinny front tires for use on a drag strip. As cool as those 315 section tires look up front, they hurt far more than they help on a drag strip.