Black One Owner Clean Car Fax on 2040-cars

Auto blog

NHTSA investigating 110,000 Ram 2500s and 3500s, one death alleged

The National Highway Traffic Safety Administration has launched an investigation focusing on 110,000 Dodge Ram 2500 and 3500 pickups from model years 2004 to 2006. One death has already been reported, according to NHTSA, due to a potential fault with the clutch interlocks on manual-transmission versions of the heavy duty pickup.
According to the report, these trucks can be started without depressing the clutch. There have been three reports so far, and as we mentioned above, one very sad incident seems to have resulted in the death of a child.
"One complaint involved an incident that occurred when a child was able to enter the vehicle and start the ignition without depressing the clutch. The vehicle then moved forward striking another child resulting in a fatality," NHTSA said in the investigation bulletin, which you can view below.

2015 Dodge Charger priced from $27,995, Hellcat from $63,995*

Ladies and gentlemen, let's get the most salient bit of information out of the way right off the bat: $63,995*. That's the amount of money Dodge dealers will be asking for (at the very least, naturally) for a 2015 Charger Hellcat (*plus $995 for destination on all pricing figures). That rather reasonable sum will bring home its buyer a 6.2-liter Hemi V8 engine boasting a supercharger to post such gaudy figures as 707 horsepower and 650 pound-feet of torque, leading to a top speed of 204 miles per hour to go along with an NHRA-certified quarter-mile time of 11.0 seconds.
With that out of the way, the rest of the 2015 Dodge Charger pricing information breaks down as follows: $27,995 will deliver a sedan with a 292-horsepower 3.6-liter Pentastar V6 engine, mated to an eight-speed automatic transmission. Moving up one step of the ladder nets the buyer an SXT model with the same engine, but a nicer chunk of technology and optional equipment for a $2,000 premium. All-wheel drive adds another $3,000. Hemi V8-powered R/T models now boast an eight-speed transmission bolted to the same well-loved 370-horsepower engine as before, for a base price of $32,995.
The SRT 392 model that had hitherto been the top-performing Charger brings with it an asking price of $47,385 while bargain hunters can equip a Charger R/T Scat Pack machine with that same 485-horsepower 6.4-liter Hemi, albeit with somewhat less posh interior bits and pieces, the removal of the 392's adjustable suspension and hi-po wheel and tire package for $39,995.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.