Black Hemi 5.7l V8 Ex Police 63k Miles Warranty Pw Pl Cruise Nice on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.