2020 Dodge Charger Scat Pack Sedan 4d on 2040-cars

Auto blog

Chrysler killing off the 200 Convertible, Dodge Avenger

When Chrysler rolled out the first-generation 200 to replace the Sebring range in 2010, it included replacements for both the sedan and the convertible. The Sebring Coupe, however, was left out of the mix. And now that the second-generation Chrysler 200 is descending upon us, Auburn Hills is paring things down even further. But this time, it's the convertible that reportedly isn't making the cut. Shame, too, since the rendering above shows what could have been quite an attractive droptop.
As our compatriots at Edmunds point out, sales of the convertible model accounted for less than five percent of overall Chrysler 200 sales, and at those numbers, the considerable cost of engineering a new drop-top couldn't be justified. With the Toyota Camry Solara and Volkswagen Eos also gone from the market (well, the VW isn't gone quite yet), the discontinuation of the Chrysler 200 Convertible leaves the affordable convertible segment largely to the sportier likes of the Ford Mustang and Chevy Camaro and smaller European offerings like the Mini Cooper and VW Beetle.
The Chrysler 200 Convertible isn't the only derivative being left behind with the new model: so too is the Dodge Avenger. That will leave a glaring hole in the Dodge lineup, with nothing to bridge the gap between the compact Dart and the larger Charger. Whether the Dodge brand has any plans to replace the Avenger with another model, not to be based on the 200, remains to be seen.

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.