2012 Dodge Charger Only 5200 Miles! on 2040-cars

Auto blog

2019 Dodge Challenger SRT Hellcat Redeye is the Demon spawn

The Demon has passed from us, but the Demon's spawn are here, so please allow them to introduce themselves. A new demi-Demon trim level has been anointed as the 2019 Dodge Challenger SRT Hellcat Redeye. Plus there's an updated Challenger SRT Hellcat and new Challenger R/T Scat Pack Widebody. Like with the Charger introduced this morning, they have inherited some of the best parts from the Demon. The Hellcat Redeye is possessed by the Demon's howling supercharged 6.2-liter Hemi, making 797 horsepower and 707 pound-feet of torque. Dodge proclaims it the "most powerful production V8" and "quickest production muscle car," with a 0-60 time of 3.4 seconds and quarter-mile time of 10.8 seconds at 131 mph. Top speed: 203 mph. Dodge can claim these superlatives, of course, because the 840-horsepower Demon's limited production run has ended. The Hellcat Redeye's Hemi is paired with an eight-speed automatic. Dodge says the powerplant gets 25 major component upgrades, including a larger supercharger (2.7 liters, up from 2.4) with higher boost pressure (14.5 psi, up from 11.6), strengthened connecting rods, pistons and valve train, high-capacity fuel injection system and improved lubrication. It gets a second fuel pump and a higher redline of 6,500 rpm. Theoretically, if you were someplace where you could operate at full throttle without letting up, Dodge says the Hemi would drain the fuel tank in under 11 minutes. Yet the car gets a 22 mpg highway rating from the EPA. View 30 Photos It also has the Torque Reserve system that starts building boost before launching, as well as the air conditioned intercooler to provide extra cool intake air. Both of these were features in the Demon. Furthermore, if the standard 2.62:1 final ratio isn't quick enough for you, Dodge offers a 3.09:1 rear axle. The Challenger SRT Hellcat Redeye also comes with the Demon and Hellcat Widebody's fat fender flares. It's an unsurprising inclusion, since you'll want as much tire as possible for all that power. Now, a mere clear-eyed Challenger SRT Hellcat gets a 10-horse boost for 2019 to 717 horsepower, and a smidge more torque at 656 pound feet. A six-speed manual transmission is standard, and an eight-speed automatic is an option. Both Hellcat models get the new dual-snorkel hood we've seen in spy shots. It's meant to evoke 1970s Dodge muscle cars. Dodge says the airflow from the hood alone reduces engine temperature by 4 degrees Fahrenheit.

Dodge Challenger ACR rumored finally on its way using Viper ACR as benchmark

In 1995, Dodge released the ACR Neon, an unlikely combination of cheap, compact American sedan and high-performance parts and engineering marked by initials standing for American Club Racer. Dodge sold a heap of them, so the automaker flexed the ACR brand's potential with the first ACR Viper in 1999. The racy coupes made huge noise for Dodge and the Viper. After the fourth-gen Viper ended production in 2010, Dodge took a Challenger ACR concept to SEMA in 2011. But instead of carrying the coupe to production, Dodge resurrected the Viper for 2013 and got one more Viper ACR model out during the last Viper's final years. With the Viper gone again, it appears Dodge is sorting out that Challenger ACR concept for real. Last October, Mopar Insiders reported the automaker was trying to get a Challenger ACR prepared for the model's 50th anniversary this year. The timing looks highly unlikely, but an Allpar source says the track-happy coupe is still coming, and with bonkers expectations and gear. We're talking about a big-boi widebody Challenger tuned to do hard laps, fast, around twisty circuits, all day long. An Allpar insider known as "Muther," a code name to tug at John le Carre's heart, said Dodge is considering two engines. Because the point of the car is to be raced and some series don't accept forced induction, one trim would fit the naturally aspirated 392 Hemi from the R/T Scat Pack. There's no telling if that motor would get a power bump, but the Challenger ACR concept upped its output slightly with measures like a cat-back exhaust. The other trim, naturally, would fit the 6.2-liter Hellcat Redeye V8.     Muther told Allpar that if engineers can get the car under 4,000 pounds, the math points to being within two seconds of the time set by the Viper ACR-E at Road America. That "E" represents the Extreme Aero Package, with addenda like a deeper front splitter, dive planes, and an adjustable, dual-element rear wing that helped the Viper ring up 14 lap records on U.S. tracks. The fastest time we know of for a Viper at Road America is from 2011, factory race driver Kuno Wittmer doing 2:20 even in a Gen IV Viper ACR. Wittmer's ride weighed 3,408-pounds. Dodge boffins want to get the Challenger ACR under 4,000 pounds. Achieving the weight goal would mean cutting at least 387 pounds from a standard R/T Scat Pack Widebody, and 512 pounds from the Hellcat Redeye Widebody if that trim has the same target.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.