2011 Dodge Charger Police 29a Hemi on 2040-cars

Auto blog

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video:

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

Dodge recalls 121,603 examples of Dart for loss of brake assist

Dodge will recall 121,603 worldwide examples of the 2013-2014 Dart with the 2.0- and 2.4-liter engines because of possible loss of power brake assistance. The company reports two minor injuries and seven accidents potentially related to this problem. The affected models have build dates before Jan. 24, 2014. There are 105,458 of these vehicles in the US; 11,996 in Canada; 3,705 in Mexico; and 444 outside of NAFTA. This campaign doesn't affect Darts with the 1.4-liter engine. These vehicles' brake-booster vacuum tube routing can potentially allow oil to access and eventually to degrade the brake booster diaphragm. If this happens, then the vehicles could lose braking assist. The brakes themselves would continue to work, but the driver would experience longer stopping distances. A pop or similar sound of a vacuum leak sometimes precedes the problem, according to the automaker. Dealers will inspect the components and replace the vacuum tube. If technicians find oil in the tube, they'll also swap out the vacuum pump, brake booster, and master cylinder. Affected owners will receive notice from the company within the next 60 days. Statement: Vacuum-tube Assembly December 3, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 105,458 compact sedans in the U.S. to inspect and replace vacuum-tube assemblies and certain other components, as required. Some of the affected vehicles may be subject to oil migration that could affect their brake systems' power-assist feature. Foundation brake function is unaffected. However, if this condition occurs, the driver may notice hard pedal-feel on brake application, and longer distances may be required to stop the vehicle in emergency situations. An FCA US investigation identified certain model-year 2013-14 vehicles equipped with 2.0-liter and 2.4-liter engines, may have brake-booster vacuum-tube routing that inadvertently allows oil to reach the brake booster diaphragm, if ever the vacuum-pump check valve fails. Oil may degrade the diaphragm and lead to a loss of brake-assist – a feature that helps reduce stopping distances. FCA US is aware of two minor injuries and seven accidents that are or may be related to this condition. The recall is limited to model-year 2013-14 Dodge Dart sedans produced before Jan. 24, 2014. It also affects an estimated 11,996 cars in Canada; 3,705 in Mexico and 444 outside the NAFTA region. Vehicles equipped with 1.4-liter engines are excluded.