2008 Dodge Charger R/t Hemi Sunroof Htd Leather 77k Mi Texas Direct Auto on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Here are the Challenger SRT Demon's bare-minimum performance numbers

This week's Dodge Challenger SRT Demon teaser video provides what seems like more concrete evidence than any of the others before it. We say it seems that way because the numbers flashed on the screen are likely not showing us everything the car has to offer. So we're looking at these as the minimum performance stats and expecting Dodge to reveal even crazier numbers alongside the car next month. The video also provides some hints at features and modes the car will offer. Let's pick it apart. First off, there's the performance data from the various SRT Performance Pages screens. The 0–60 mph time is 3.0 seconds, which compares well to the "regular" Hellcat's 3.5-second manufacturer claim. Then there are two 0–100 times: 6.08 and 6.8. An eighth-mile time of 6.6 seconds at 125 mph and a quarter-mile time of 0.5 seconds at 129 mph lead us to believe the driver lifted off the throttle in that second eighth-mile and that the car will actually do the quarter in the low 10s. For reference, Dodge claims an 11.2-second quarter for the Hellcat on its street tires and a 10.8 with race slicks. View 7 Photos We also get a cryptic message about the supercharger boost pressure, which suggests it will be higher than the 11.6 psi of the 6.2-liter Hellcat engine. A graph shows it heading up toward 10 psi but the final spike is obscured by a Demon head. Cute. There's a hint at horsepower and torque numbers in a graph on the Dyno page, which shows both peaking around 750. In every shot of this video, the clock is set to 7:57, which we think means it either has that much power or, well, more. We think there's more to it because it appears that part of the graph above the dyno run shown, which would reach to 800 or 850, has been blanked out. A horsepower total of 808 would be a nice complement to the Hellcat's 707, don't you think? We can see from the shift indicator screen that the car will come with or at least offer the eight-speed automatic that's also available in the Hellcat and other Challengers. That's likely to be the best option for drag racing. The Demon's user-defined shift light feature, which lets you choose an optimal shift rpm for each individual gear, also suggests that a six-speed manual will be available. We'll cover the many modes and settings highlighted in this video in a separate post. There's a lot to discuss. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.