2007 Dodge Charger Unmarked Retired Nc Highway Patrol Car 5.7l Hemi on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

2014 Challenger R/T Shaker, Mopar '14 Challenger bring back iconic hood

Enamored of the Dodge Challenger but wish you could get one with a shaker hood? We've got good news, because Dodge and Mopar have teamed up to bring it back.
The 2014 Dodge Challenger R/T Shaker packs the same 5.7-liter Hemi V8 as the standard Challenger R/T, but upgrades the business end with a through-the-hood exposed cold-air intake system. The retro hood scoop protrudes from the center of the hood in satin black (matching the decklid spoiler) to feed the Hemi and shakes with the engine just like the original from 1970. The Shaker model also comes with a Super Track Pak that adds a new steering rack, brake linings, shocks and 20-inch Goodyear Eagle F1 Super Car rubber. You can also shut off the stability management system completely in this car. A series of interior and exterior trim enhancements round out the look. The whole package adds $2,500 to the price of a Challenger R/T Classic for an all-in MSRP of $36,995.
In case that's not enough, Dodge is also offering a limited-edition Mopar Challenger that follows the 2010 Mopar Challenger, 2011 Mopar Charger, 2012 Mopar 300 and 2013 Mopar Dart. Limited to just 100 examples, the 2014 Mopar Challenger gets the same Shaker hood intake, unique graphics and wheels, an enhanced interior and a long list of optional extras from the Mopar parts catalog. Dodge isn't saying just yet how much the Mopar Challenger will cost, but you can bet it will command a considerable premium for the exclusivity alone.

2019 Dodge Challenger Hellcat with twin-scoop hood spied with no camouflage

Dodge recently teased an updated 2019 Challenger SRT Hellcat sports coupe complete with an all-new hood with dual scoops. It didn't reveal anything else about the vehicle, saying more details were coming. And now we have more details, but not in the way Dodge probably wanted. We can now see the updated Hellcat with the new hood. To be perfectly honest, it's pretty much what we expected. The teaser photos indicated that the hood was the only major body change, and this car confirms it. The rest of the body is identical to a normal Hellcat. The bumpers, grille mesh, even the wheels are all standard Hellcat parts. Even the slotted rotors and Brembo calipers look the same. This car does suggest that the hood will be available on both the narrow-body Hellcat and the Hellcat Widebody, the latter of which was featured in the teaser images. There is actually one other minor difference on this 2019 Hellcat's exterior, and that's the grille badging. There's now a vintage-style badge with "Challenger" written in script off to one side. Currently only one grille and badge design is available on Hellcat, and it features just the SRT Hellcat logo. It appears the SRT badge is still present, but blocked off on this prototype. So it's possible this new badge comes with the new hood as a sort of retro package for Hellcat. We should have all the details on this and other 2019 Challengers when the car is officially revealed later this summer. Related Video: Featured Gallery 2019 Dodge Challenger SRT Hellcat Spy Shots View 11 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe Performance dodge challenger srt hellcat