2007 Dodge Charger - Retired Police Vehicle on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

As Dodge Challenger changes, hybrid or however else, it's sure to stay retro

Unverified rumors claim Dodge will make major technical changes to the Charger and the Challenger (pictured) to comply with looming regulations. They'll likely be lighter than they currently are, they could get smaller in nearly every direction, and you can safely bet that they'll incorporate some degree of electrification. The retro-inspired, heritage-laced design is here to stay, however. Mark Trostle, Dodge's horsepower-addicted chief of design, told Muscle Car & Trucks that looks deserve a big chunk of credit for making the Charger and the Challenger as popular as they are. Horsepower and quarter-mile times help sell cars, but it's the "magic of their design" that lures buyers into showrooms to check out the modern-day muscle cars in the metal. "I wouldn't want to ruin something that's been so successful for us," Trostle concluded. He compared the Challenger to the Jeep Wrangler, another design icon in the Fiat-Chrysler Automobiles (FCA) portfolio. The offroader entered its fourth generation in 2018; every part of it is new, and it's not a Xerox copy of its predecessor, but it's still immediately recognizable as a Wrangler. Trostle hinted he's planning this type of evolutionary design for the next-generation Challenger. After all, it's part of the company's history, and heritage is something no amount of money can buy.  While it sounds like development work on the next-generation Challenger is ongoing, Dodge isn't finished with the current-generation car yet. The nameplate will celebrate its 50th birthday during the 2020 model year, and it's reasonable to assume Dodge has something special planned for it.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.