2006 Dodge Gharger Srt 8 Srt8 Hemi 6.1 426 Hp Red 2007 2008 2009 on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Autoblog Minute: 2016 Dodge Charger pursuit vehicle gets Uconnect 12.1

Dodge introduces new tech into its 2016 pursuit vehicles that even Jake and Elwood couldn't outrun. Autoblog's Adam Morath reports on this edition of Autoblog Minute. Show full video transcript text [00:00:00] Dodge introduces new tech into its 2016 pursuit vehicles that even Jake and Elwood couldn't outrun. I'm Adam Morath and this is your Autoblog Minute. The 2016 Dodge Charger Pursuit vehicles are getting Uconnect 12.1. The system's new laptop size touch screen will be dash mounted and at 12.1" is 5 times larger than the current Uconnect 5.0 system. Features of Uconnect 12.1 [00:00:30] include an all-new drag and drop menu bar and Siri Eyes Free. No clunky laptops needed because the system is ergonomically located in the dash. The SRT pursuit vehicles will also be getting 370 hp, factory-installed Mopar upfit packages and an advanced all-wheel-drive system for maximum tactical performance, all-weather traction and fuel-efficiency. [00:01:00] It's clear that the new Charger pursuit vehicles have all the best tech available from Dodge but one important question remains: Do these cruisers got S.C.M.O.D.S.? For Autoblog, I'm Adam Morath. Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals. Dodge Technology Autoblog Minute Videos viral video

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?