2006 Dodge Charger Hemi Srt8 Black on 2040-cars

Auto blog

Junkyard Gem: 1994 Dodge Spirit

Under Lee Iacocca's watch, Chrysler began selling the first of the modern new K-Cars for the 1982 model year, and American sales of Ks and K-derived cars and minivans continued all the way through 1995. While these vehicles saved Chrysler from near-certain doom after the agony of a government bailout in 1979, the platform had become pretty outdated by the middle 1990s (though GM didn't hesitate to sell its similar-vintage J-Cars well into our current century). The Spirit replaced its aging Aries cousin starting in 1989, and has become very tough to find today. Here's a late Spirit with the optional Mitsubishi V6 engine, found in a Denver self-service yard recently. For the 1991 and 1992 model years, the Spirit R/T was the fastest new four-door car you could buy in the United States. With 224 horsepower from a very nervous turbocharged 2.2-liter engine, the Spirit R/T could run the quarter-mile in 14.5 seconds and hit a top speed of 141 mph. Today's Junkyard Gem isn't one of those cars, unfortunately. The base engine in the 1994 Spirit was a 2.5-liter Chrysler straight-four rated at 100 horsepower, but this car has the optional 142-horse Mitsubishi 6G72 V6 engine. The 6G7 family of engines remains in production to this day, 35 years after the first one went into a Galant, and members of this engine family have powered everything from the Diamante to the Sonata. On Chrysler vehicles of all-Mitsubishi design from this era, the engines tended to have big Mitsubishi emblems prominently displayed. For a Chrysler-designed car, though, it made more sense to badge the engine as a Chrysler. Note the British spelling of the unit of displacement here; GM and Ford started that trend back in the 1960s, with the "6.5 litre" Pontiac GTO and "7.0 litre" big Fords. With the big engine plus power windows, decklid luggage rack, and other luxurious (for a Spirit) options, I'm pretty sure this car didn't start life in a fleet. It drove more than 175,000 miles during its time on the road. The resale value of a 26-year-old Detroit sedan with high miles can't be much, even if the interior still looks nice enough, so any mechanical problem (or just a trade-in) spells doom for cars such as this one. The gold insets in the aluminum wheels look very stylish. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 117 out of 200 Americans preferred the Spirit to the Honda Accord! This content is hosted by a third party.

2019 Dodge Challenger SRT Hellcat Redeye priced $14,000 below Demon

Steve Beahm, head of Passenger Car Brands at Dodge, SRT, Chrysler, and Fiat, told Motor Trend that the 2019 Dodge Challenger SRT Hellcat Redeye is "a Hellcat that's been possessed by a Demon." Turns out the Hellcat Redeye was also possessed by The Ghost of Great Deals. Dodge just released pricing for the Challenger line, the crimson-eyed terror at the top starting at $69,650, which is $13,645 less dear than the $83,295 MSRP for the 2018 Challenger SRT Demon. The asterisk: the Redeye needs the same $1,345 destination charge and $1,700 gas guzzler tax as the 2018 Demon, so the difference still holds once you get the Redeye off the dealer lot. The final tally: $72,995. Torque News acquired a copy of the Challenger dealer order guide, and options on the Hellcat Redeye will run you a little more than the bucket of $1 options on the Demon. Among the list, the summer performance tires add $695, the optional 3.09 rear axle adds $1,095, a painted black hood costs $1,995, and the Widebody package adds $6,000 for it's extra 3.5 inches. According to TN, you can run a standard Hellcat Redeye up to almost $90,000, and push a widebody to $95,000. The standard Challenger SRT Hellcat gets touched by the bargain bogeyman, too: the price goes down by $5,645 for 2019 to $58,650, even though it's been uprated by ten horsepower to 717 hp, and by six pound-feet to 656 lb-ft. Out-the-door price after a $1,700 gas guzzler tax and $1,345 destination fee is $61,695. Before including destination, there's a long way down to the next model, the 485-horsepower Challenger R/T Scat Pack at $38,995. Buyers who choose the six-speed manual for this trim will pay a $1,000 gas guzzler tax. The V6-powered, 305-hp Challenger GT in two-wheel drive starts at $29,995. Sending power to all four of the GT's wheels needs $32,995 before destination. The base model, two-wheel drive SXT gets the Challenger doors open at $27,295, the all-wheel drive model costing $30,295. Related Video:

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.