1974 Dodge Charger 340 4 Speed on 2040-cars
Freetown, Indiana, United States
|
No reserve Auction, This 1974 dodge charger will sell to the highest bidder. 1974 dodge charger 4 speed 340 with non matching numbers engine, 355 rear , nice interior front seats not original but look nice , paint is suitable for a driver. this car is a real head turner, center line wheels and a fuel cell in the trunk , new front end bushings and ball joints, the engine was rebuilt for this car about 20,000 miles ago and the paper work for rebuild will come with car, the transmission shifts smoothly through all four gears , this car is a cruiser and can be driven any where,the car has true dual exhaust with flowmasters and sounds amazing all of the lights and gages work in the car front disc brakes and rear drums new carpet and headliner the car is from Georgia and doesn't have any rust at all the trunk floors frame and floor boards are all rock solid..ask questions and bid with confidence but please be ready to pay at the end of the auction and be ready to make Arrangments to pick the car up as I am moving out of state and cannot take the car..any questions you can call me at 812 525 1577 car is located in Indiana. |
Dodge Charger for Sale
2006 dodge charger r/t sedan 4-door 5.7l(US $9,500.00)
Restored 1st yr orig 1966 dodge charger sport hardtop 383/auto posi ps 40 pics
1970 dodge charger rt burnt orange number matching motor and tranny c-stripe
2007 dodge daytona sublime edition
08 orange 5.7l v8 automatic miles:50k navigation sunroof sedan
1969 dodge charger 500 1970 general lee
Auto Services in Indiana
World Wide Automotive Service ★★★★★
World Hyundai of Matteson ★★★★★
William`s Service Center ★★★★★
Twin City Collision Repair Inc ★★★★★
Trevino`s Auto Sales ★★★★★
Tom Cherry Muffler ★★★★★
Auto blog
1972 Dodge Challenger on an M1009 CUCV military frame is YES
Sun, May 31 2020The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.
Takata adds millions to recall expansion in US [UPDATE]
Thu, May 28 2015UPDATE: Ford spokesperson Kelli Felker has advised Autoblog that of the 1,509,535 total vehicles worldwide that the company is recalling, 966,504 of them are new additions for this expanded safety campaign. Last week, the National Highway Traffic Safety Administration announced that the Takata airbag inflator recalls would expand to an estimated 33.8 million vehicles in the US. However at the time, automakers weren't sure specifically which of their models might be affected under this enlarged campaign. Now, the numbers for BMW, FCA, Ford, and Mitsubishi are being released by the agency. Additionally, Honda is outlining the broadening of its own campaign. BMW's recall amounts to 420,661 vehicles in the US, an increase from 140,696 previously. All of the following models need their front, driver's side airbag replaced: 2002-2005 BMW 325i/325xi/330i/330xi Sedan 2002-2005 BMW 325xi/325i Sportswagon 2002-2006 BMW 330Ci/325Ci/M3 Convertible 2002-2006 BMW 325i/330i/M3 Coupe 2002-2003 BMW M5/540i/525i/530i Sedan 2002-2003 BMW 540i/525i Sportswagon 2003-2004 BMW X5 3.0i/4.4i BMW has received no reports of any injures or deaths from this problem in its vehicles. FCA has 5,224,845 vehicles globally in need of inflator replacements, according to its statement. However, the company is only aware of one injury related to the issue, which occurred in a 2006 Dodge Charger in southern Florida. There are 4,747,202 vehicles worldwide from the company that are affected on the front, driver's side. Among these, 4,066,732 are in the US, 374,508 are in Canada, and the rest are in other countries. The models are: 2005-2009 Dodge Ram 2500 Pickup 2004-2008 Dodge Ram 1500 Pickup 2006-2009 Dodge Ram 3500 Pickup 2007-2009 Dodge Ram 3500 Cab Chassis 2008-2010 Dodge Ram 4500/5500 Cab Chassis 2008-2009 Sterling 4500/5500 Cab Chassis 2004-2008 Dodge Durango 2007-2008 Chrysler Aspen 2005-2010 Chrysler 300/300C/SRT8 2005-2010 Dodge Charger/Magnum 2005-2011 Dodge Dakota 2006-2010 Mitsubishi Raider Also, there are 438,156 vehicles in the US, according to the NHTSA documents, that need their front passenger's side inflators replaced in the expansion of an earlier regional recall: 2003 Dodge Ram 1500 2003 Dodge Ram 2500 2003 Dodge Ram 3500 The total number of vehicles from Ford now covered under these campaigns stands at 1,509,535 worldwide. Of this total, there are 1,380,604 in the United States, 93,207 in Canada and 16,953 in Mexico.
UAW workers in Indiana, Stellantis reach tentative deal to end strike
Mon, Sep 12 2022United Auto Workers union members who went on strike Saturday at the Stellantis casting plant in Indiana have reached a tentative deal with the company. The UAW Local 1166 bargaining committee announced a tentative agreement in a blog post, saying that a ratification vote would be held Monday. Stellantis confirmed the tentative deal Monday. The strike was related to health and safety issues, including the company’s alleged refusal to repair and replace the plantÂ’s air conditioning and heating systems. The 35-acre plant in Kokomo makes parts used in the power trains of Chrysler, Dodge, Jeep and RAM vehicles. The 1,200-worker plant, Kokomo Casting, is the worldÂ’s largest die cast facility, according to Stellantis. In May, Stellantis announced a $2.5 billion joint venture with Samsung to build an electric vehicle battery factory in Kokomo that is to employ 1,400 workers. Stellantis, created last year through the merger of Fiat Chrysler and FranceÂ’s PSA Peugeot, had said it would build two electric vehicle battery factories in North America. The other is slated for Windsor, Ontario. Plants/Manufacturing UAW/Unions Chrysler Dodge Jeep RAM










