1970 Charger Rt Real V Code Six Pack Real Tx9 Paint Code Black Velvet Dana Rear on 2040-cars

Auto blog

Dodge Journey gets new $24,895* SE V6 AWD model

While the Dodge Journey crossover remains largely unchanged for the 2014 model year, there are two new flavors of the seven-passenger CUV on offer: the butch-looking Crossroad, and the SE V6 AWD, pictured right, which makes its debut today. As its name suggests, this new Journey model features the automaker's 3.6-liter Pentastar V6, and offers all-wheel drive, which, with a starting price of $24,895 (*excluding $995 for destination), reduces the cost-of-entry for an AWD-equipped Journey by $1,800 versus the SXT AWD model. Scroll down for the official press blast.

2 men die in Dodge Challenger Hellcat crash at Colorado airport

Two friends died in the crash of a Dodge Challenger Hellcat over the weekend after they shot off the end of an airport runway, authorities said. That someone died in a 707-horsepower Hellcat is, sadly, not unexpected. But two aspects of the story are remarkable. First, the men's ages: The Denver Post reports the crash victims were Lynd Fitzgerald, 71, of Colorado Springs, and his passenger, Roger Lichtenberger, 76, of San Marcos, Calif. Second, their speed: The car was likely moving at over 100 miles per hour, authorities said. The men had permission to use the 8,300-foot runway at Central Colorado Regional Airport in Buena Vista. That's more than a mile and a half long. But when the car left the runway, it went 300 feet before flying over a ravine, hitting the ground, becoming airborne again, flipping end over end across a second ravine, and ultimately landing on its wheels 650 feet past the end of the pavement. Responding police officers tried to provide first aid, but the men were declared dead at the scene. "They were just test-driving this car. They went a little too fast. I don't want to surmise. ... They probably got to the end of the runway and, at that speed, didn't realize they were there so fast. And they lost control. It was just too high a speed and they got to the end of the runway," said Chaffee County Sheriff John Spezze. There were skid marks near the end of the runway, but the sheriff didn't know the length. "I've never seen anything like it," Spezze told the newspaper. "They had permission to be there. There were no laws broken." Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat