1968 Dodge Charger R/t!!!!! 440 Automatic on 2040-cars
Clarence, New York, United States
|
THIS CAR WAS COMPLETELY REDONE IN THE LATE 80'S!!! TRUE 9-28-1967 DATED 440 ENGINE ALL GAUGES AND FACTORY RADIO WORK IN FAMILY SINCE 1970!!!! ALL ORIGINAL BODY PANELS,TRUNK,AND FLOOR PANS ALL COLORS MATCH FENDER TAG A TRUE RARE R/T 440 CHARGER!!! AN ABSOLUTE GORGEOUS PIECE THAT IS 99% ORIGINAL AND HAS ALL MOPAR PARTS USED FOR RESTORATION IN THE 1980s THE PICTURES DONT DO THIS CAR JUSTICE,THE UNDER SIDE IS ALL FACTORY COLORS WITH ATTENTION TO EVERY FACTORY DETAIL THE FENDER TAG AND VIN PLATE ARE IN FACTORY LOCATIONS AND RADIATOR CORE SUPPORT STAMP MATCHES FENDER TAG A TRUE RARE MUSCLE CAR THAT LOOKS AS ORIGINAL AS IT DID IN 1968 WILL ACCEPT TRADES OF ANYTHING IN THE AUTOMOTIVE INDUSTRY CLEAN PAPERWORK IN HAND,READY FOR THE AVID DODGE COLLECTOR HAVE TO SEE THIS CAR TO BELIEVE!!!!!!! CAR BEEN IN HEATED STORAGE PAST 12 YEARS AND MILES SHOWN ON ODOMETER IS MILES DRIVEN SINCE RESTORATION AND NOT TRUE MILES ON CAR,MILES EXEMPT FACTORY A/C CAR,ONLY EVAP CORE IN DASH,AC COMPRESSOR,CONDENSER,LINES AND DRYER IS MISSING, HEATER CORE IS BY PASSED,WAS INSTALLED NEW DURING RESTORATION
Please feel free to call with any questions 716-481-1455 Joe The car is in my shop at 9385 main street,clarence,NY, 14031..716-759-6736 It has fresh plugs and oil change I reserve the right to end auction early as it is for sale locally:) Don't miss out on this piece of muscle car history I am by no means a mopar expert,will answer all questions to the best of my knowledge DONT MISS OUT!!!!!!!! CAN HELP DELIVER IF NEEDED,PLEASE CALL FOR A QUOTE
|
Dodge Charger for Sale
2007 dodge charger 3.5l v6 only 37,195 miles!!!! 28 mpg(US $15,395.00)
2014 dodge charger r/t sedan 4-door 5.7l(US $33,000.00)
Charger 6.4 srt8 navigation heated cooled leather power roof rear cam warrantee(US $37,887.00)
(US $12,000.00)
Dodge rt plus hemi 5.7 engine heated power seats wheels low millage htd steering(US $24,887.00)
2011 dodge road/track
Auto Services in New York
Wheel Fix It Corp ★★★★★
Warner`s Auto Body ★★★★★
Vision Kia of Canandaigua ★★★★★
Vision Ford New Wholesale Parts Body Shop ★★★★★
Vince Marinaro Automotive Inc ★★★★★
Valu Muffler & Brake ★★★★★
Auto blog
Fiat Chrysler CEO says final merger talks with Peugeot going well
Thu, Jan 23 2020BRUSSELS — Fiat Chrysler's chief executive Michael Manley said on Wednesday that merger talks with Peugeot owner PSA to create the world's No. 4 carmaker are progressing well and he hopes to have a deal within 12-14 months. Speaking to Reuters on the sidelines of an industry meeting, he said he doesn't expect any major obstacles that could delay a final agreement. "Talks are progressing really well," Manley said about negotiations with the French carmaker ahead of a briefing by the European automotive association (ACEA), of which he is president. His comments come a month after the two carmakers agreed to a binding deal worth about $50 billion to combine forces in response to a slowdown in global demand and mounting costs of making cleaner vehicles amid tighter emissions regulations. Manley's timeline for completing the deal by early 2021 is in line with a forecast made by the companies in December. Fiat and Peugeot are now getting into the details of how the merger will work, including choosing which vehicle platforms — the technological underpinnings of a vehicle — will fit which products in a combined company. Because customers in different locations still prefer vastly different cars, there is room for multiple platforms in a combined group, Manley said. "That global platform is an elusive beast," he added. "This concept of a massive global platform in my mind is almost a myth, but that doesnÂ’t mean to say weÂ’re not going to recruit significant volume." Related Video:  Â
FCA goes all-in on Jeep and Ram brands on cheap gas bet
Wed, Jan 27 2016It's no surprise that as SUV and truck sales remain strong in the wake of unusually cheap gas, Jeep and Ram sales are taking off. What is a surprise is that FCA CEO Sergio Marchionne thinks that cheap gas will be a "permanent condition," and feels strongly enough about it to change up North American manufacturing plans. Jeep appears to be the biggest beneficiary of the product realignment. In addition to increasing the sales estimates for the brand worldwide upwards to 2 million units a year by 2018, the brand will get a flood of investment for new product and powertrains. Consider the Wrangler Pickup to be part of the salvo, as well as the Grand Wagoneer three-row announced in 2014 as part of the original five-year plan. The Wrangler four-door will get at least two new powertrains, a diesel and mild hybrid version, in its next generation. That mild hybrid powertrain may utilize a 48-volt electrical system like the one that's being developed by Delphi and Bosch – which the suppliers think will be worth a 10 to 15 percent fuel economy gain at a minimum. Down the road, in the 2020s, the Wrangler could adopt a full hybrid system. The diesel powertrain is planned for 2019 or 2020. The Ram 1500 is also pegged to receive a mild hybrid system, again potentially based on 48-volt architecture, sometime after 2020. Lastly, Jeep and Ram will take over some of the production capacity of existing plants. The Sterling Heights, MI, plant that builds the Chrysler 200 will now build the Ram 1500; the Belvidere, IL, facility that produces the Dodge Dart will take over Cherokee output; the big Jeep facility in Toledo, OH, will be used for increased Wrangler demand. In 2015, according to FCA's numbers, car and van demand went down by 10 percent, but SUV demand went up 8 percent and truck demand 2 percent. Considering that these are high-margin vehicles, FCA can't ignore the math. FCA also won't build any new factories to supplement production to meet demand, but instead are reshuffling production priorities. Think of it this way: FCA is gambling on cheap gas being a permanent part of our lives, at least into the 2020s. By doubling down on SUVs and trucks, the company stands to win big, unless a spike in gas prices changes the landscape. FCA isn't talking about a Plan B, so they're all in. It'll be interesting to see how this plays out.
2018 Dodge Challenger SRT Demon sheds seats and insulation to drop weight
Tue, Jan 31 2017You've probably already heard that the 2018 Dodge Challenger SRT Demon will be lighter than the Hellcat Challenger – to tune of more than 200 pounds. What you probably don't know is that the Dodge team did it by dropping most of the seats, along with a few other tricks. The Demon loses 113 pounds by making the front passenger seat with its seatbelt (58 pounds) and back seat (55 pounds including restraints and floor mats) optional, which accounts for a large chunk of the weight loss compared to the Hellcat. The Demon also has unique 18-by-11-inch wheels, which are 16 pounds lighter than the Hellcat's, a manual tilt/telescope steering column instead of the powered one, which loses four pounds, and an 18-pound loss thanks to removing 23 noise, vibration, and harshness parts (the Demon will not be a quiet car, to say the least). Another 20 pounds is lost removing the trunk interior trim and spare tire. Still, the Demon gains 17 pounds thanks to the wide fender flares that accommodate the massive drag radials, which also add 3.5 inches to the car's width. For reference, the lightest Hellcat weighs 4,448 pounds with a manual transmission, and the automatic-equipped car comes in at 4,455 pounds. The Demon will be revealed in April before the New York Auto Show, and Dodge will continue to tease its latest satanic muscle couple weekly until then. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.























