2017 Dodge Challenger Srt Hellcat on 2040-cars

Auto blog

Chrysler, Nissan minivans earn 'dire' crash test results, says IIHS [w/video]

First introduced in 2012, the Insurance Institute for Highway Safety's small-overlap frontal crash test has become the bane of many auto engineers' existence. It's a particularly steep design challenge because it forces just 25 percent of a vehicle's front end to take the brunt of a 40-mile-per-hour impact. The newly released results of four family-minded minivans underscore just how difficult the crash test is: only one scored an Acceptable rating, and the other three did very poorly. The 2008-2015 Chrysler Town & Country and Dodge Grand Caravan, plus the 2011-2015 Nissan Quest, all received Poor ratings in the test, the IIHS' lowest possible score. The three of them showed significant crash intrusion into the driver's area. The dummy in the Nissan actually had to be cut out of the vehicle, with an IIHS spokesperson remarking, "the structure collapsed like a house of cards." In the Fiat Chrysler Automobile vans, the steering wheels moved out of the way, making the airbag less effective and letting the driver's head hit the dashboard. While it was not actually crashed, the agency is also giving the 2009-12 Volkswagen Routan a Poor score because it shares a structure with the FCA models. The newly released results of four minivans underscore just how difficult the small-offset crash test is. The refreshed 2015 Toyota Sienna (shown), conversely, earned an Acceptable rating and is also a Top Safety Pick+ because of its optional forward collision warning and automatic braking system. While the crash test dummy moved around during the impact more than the agency would have liked, sensors showed a low risk of injuries. The IIHS tested the Honda Odyssey last year, and it earned a Good overall score, the agency's best ranking. It's also a Top Safety Pick+ vehicle. The only member of the minivan segment left to test is the latest Kia Sedona, and the Institute is reportedly waiting a little longer for Kia to make changes to improve the model's performance. When reached for comment, Nissan spokesperson Steve Yaeger provided Autoblog with the following statement: "Nissan is committed to vehicle safety and believes that consumers should have information about crash protection so they can make educated buying decisions. Nissan is proud of the 2014 Quest's "good" rating in the IIHS front moderate overlap and side impact tests as well as a "good" head restraint rating.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.