2014 Dodge Challenger Sxt on 2040-cars

Auto blog

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

Dodge, Jeep and Ram could soon be owned by Chinese automakers

For the past several years, Fiat Chrysler CEO Sergio Marchionne has made it widely known that the automaker he helms is up for grabs. First, he sent an email to GM CEO Mary Barra, who immediately refused to even discuss a merger. Later, Marchionne set his sights on Volkswagen. That too was swiftly rebuffed. It seemed like no global automaker was remotely interested in a partnership. Now, Automotive News reports that several Chinese automakers have come calling, only FCA isn't ready to answer. At least not yet. The news broke this morning that a major Chinese automaker had made an offer to purchase FCA for slightly above market value. FCA refused, saying the offer wasn't quite generous enough. It's unclear which automaker made the offer, but Automotive News says there's more than one interested party. FCA representatives have recently traveled to China to meet with Great Wall Motors, while Chinese representatives were seen at FCA corporate headquarters in Auburn Hills, Mich. The Chinese government has a lot of money invested in local automakers. It's putting pressure on these automakers to expand globally, including to the United States. As it stands, it's a matter of when a Chinese automaker will start selling cars here, not if. Purchasing an established automaker with a wide range of products and a huge dealer network would do wonders in giving the Chinese a foothold here. Sure, Geely owns Volvo, but a luxury automaker doesn't have nearly as much reach as a more mainstream company like FCA. This seems like the best case scenario for both a Chinese automaker looking to move into the U.S. and for FCA, at least from a business standpoint. The latter doesn't seem to have any other interested parties. It will be interesting to see how FCA would sell a deal like this to the public. We're not sure everyone will be happy with Dodge, Jeep and Ram falling under Chinese ownership. FCA didn't turn down the Chinese because they didn't like the idea. It turned down the offer because there wasn't enough money on the table. Related Video: News Source: Automotive News Earnings/Financials Alfa Romeo Chrysler Dodge Fiat Jeep RAM

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.