2013 Dodge Challenger Srt8 Manual Trans With Black Vaper Wheels!! on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

What is the fastest car in the world in 2024?

It wasn't that long ago that the notion of reaching 200 miles per hour in a car, on a road, seemed basically impossible. As you likely know by now, that time has passed. And once that threshold was crossed, the automotive world immediately began eying the next triple-digit benchmark: 300 miles per hour. It may have taken a little while, but the 300-mph line has been crossed, and some cars have moved well past that seemingly insane speed number. While some of these speeds have been achieved in simulations (including the fastest car listed below), there's little doubt that a driver with nerves of steel and a heavy right foot could indeed push several automobiles up to 300 miles per hour and beyond. Interestingly, it’s not just one car or automaker in the 300-mph club, as a handful of models have earned a place (sometimes claimed but not yet demonstrated) on the leaderboard. The fastest car in the world is: Koenigsegg Jesko Absolut (330 MPH) That title goes to the Koenigsegg Jesko Absolut, which recorded a staggering 330 mph top speed earlier in 2023. The carÂ’s twin-turbocharged 5.0-liter V8 lays down 1,600 horsepower and 1,106 pound-feet of torque, which plays a significant role in delivering that speed, but KoenigseggÂ’s engineers have given the car a lot more than mind-blowing power. The Jesko Absolut has a super-slippery 0.278 drag coefficient and a nine-speed transmission that shifts so quickly itÂ’s almost imperceptible. Koenigsegg calls it a Light Speed Transmission (LST), saying its shifts happen at almost light speed. While that might be a slight exaggeration, the gearbox is impressive, bringing several wet multi-disc clutches and a super lightweight construction. As Koenigsegg says, "the Jesko Absolut is destined to achieve higher, more extraordinary speeds than any Koenigsegg or any other fully homologated car before it." How expensive is the Koenigsegg Jesko Absolut? If you were reading that and wondering how much the fastest car in the world costs, the price tag is just another dizzying number on the Jesko Absolut's spec sheet. All 125 Absolut cars offered sold out at a price of almost $3 million. Of course, being able to afford the Koenigsegg is just the first step in realizing its full potential. There are very few places on the map that can support a 300-plus-mph speed run, and the locations that do are not conveniently located.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.