2011 Srt8 6.4l Hemi V8 16v 6 Speed Manual Rwd Coupe Premium Sunroof Leather on 2040-cars

Auto blog

FCA cuts powertrain warranties to 60k miles

FCA US is cutting back the mileage of its powertrain warranty on some 2016 model year vehicles. Rather than the current five years/100,000 miles of coverage, the new amount is five years/60,000 miles for gasoline-fueled models from Chrysler, Jeep, Dodge and Ram. In March 2015, General Motors made a similar switch to five-years/60,000-miles of coverage for Chevrolet and GMC, and FCA US seems to be citing this as part of the reason for the shift. "Following changes already made by competitors, FCA US is adjusting powertrain warranty coverage for 2016 model year vehicles to be more consistent with industry practices," the automaker said in a portion of its statement. The bumper-to-bumper warranty for these vehicles is unchanged at three years/36,000 miles. According to Automotive News, Fiat's warranty is remaining at four years/50,000 miles. When it changed the mileage limit, GM also halved the number of free service visits for Chevy, GMC, and Buick to two from the previous four. The automaker claimed that the reason for the adjustments to its coverage was that a long warranty was seldom a reason for customers to buy a vehicle. Related Video: Response to Query: 2016MY Powertrain Warranty Adjustment Following changes already made by competitors, FCA US is adjusting powertrain warranty coverage for 2016 model year vehicles to be more consistent with industry practices. For 2016MY, Chrysler, Jeep®, Dodge and Ram Truck vehicles with gasoline engines will be covered by a 5 year/60,000 mile powertrain warranty. The basic coverage, also known as "bumper to bumper," remains at 3 years/36,000 miles. # # # News Source: FCA US, Automotive News - sub. req.Image Credit: Mark Ralston / AFP / Getty Images Chrysler Dodge Jeep RAM Car Buying Maintenance Ownership FCA warranty fca us powertrain

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.