2010 Dodge Challenger Se Coupe 2-door 3.5l on 2040-cars

Auto blog

Stellantis urges owners to fix Takata airbags after another fatality

Stellantis this morning is emphatically urging owners of older Dodge and Chrysler models equipped with recalled Takata airbags to park their cars until they can have recalls performed after the company on Friday confirmed a third fatality. The company's statement includes instructions for owners and follows this article in its entirety.  This comes just six weeks after the brands comprising the former FCA business unit urged customers to park their cars after two fatal incidents involving defective Takata airbags prompted Stellantis to issue a do-not-drive order for the 2005-2010 Dodge Charger, Magnum and Challenger, along with the Chrysler 300. The company is warning any customers who have not yet had their vehicles inspected in accordance with previous recall campaigns to park their cars until they are able to do so. This order covers more than 275,000 vehicles on the road.  No new recall has been initiated to address the faulty airbags as all of the vehicles in question are within the original population of the massive 2015 campaigns carried out by virtually every major automaker. Industry supplier Takata's airbag inflators have been identified as the cause of more than 30 fatalities when moisture caused them to explode rather than deploy normally in a collision.  Here is the full statement from Stellantis: December 19, 2022 , Auburn Hills, Mich. - FCA US LLC urges owners or custodians of certain older-model Dodge and Chrysler vehicles with unaddressed Takata driver-side air-bag recalls, to immediately stop driving them and contact the Company to obtain the required repair – free of charge. We strongly reiterate our previous warning, having confirmed a third Takata-related fatality involving this population of vehicles. They are equipped with Takata air-bag inflators whose chemical properties may deteriorate over time, particularly if exposed to hot, humid climates. Such conditions may cause the inflators to rupture on deployment, scattering razor-sharp debris capable of causing serious injury or death. “Time is a critical element here because the risk increases with each day these air-bag inflators go unreplaced,” said Tom McCarthy, global head of Technical Safety and Regulatory Compliance at Stellantis. “We have the parts, and the service is free.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

The mad genius of killing the Dodge Dart and Chrysler 200

Sergio Marchionne isn't crazy. At least not with respect to the recent announcement that Fiat Chrysler Automobiles will cease production of the Dodge Dart and Chrysler 200. Instead of crazy I'd call this CEO ruthlessly pragmatic, and perhaps short-sighted. The latest revisions to FCA's most recent five-year plan tell some truths about the company's finances. In other words, it can't afford to build mainstream sedans. With only 87,392 units sold in 2015, the Dart is an also-ran in the segment. The axe falls easily there - Chrysler hasn't had a compact-car hit since the second-generation Neon. The 200 isn't so cut and dried: Last year sales increased 52 percent, and the 177,889 total for 2015 is more than those for the Subaru Legacy and Kia Optima. But looking at the overall FCA picture the Chrysler 200 has to go, at least from a short-term perspective. The vehicles that make big money – Ram trucks; Jeep's Cherokee, Grand Cherokee, and Wrangler – can't be made fast enough. FCA can't afford to idle the 200's Sterling Heights, MI, assembly plant to cut back on inventory when other plants are running flat out. It seems crazy to throw away 265,000 sales, but FCA is leaving money on the table by not building more profitable vehicles. The Wirecutter's Senior Autos Editor (and former Autoblogger) John Neff agrees. "As bold as it looks from the outside, he's really making a safe bet that their money is better spent on designing better and building more crossovers and trucks. He's probably right about that." But according to Jessica Caldwell, Executive Director of Strategic Analytics at Edmunds, "FCA's strategy of eliminating the Dart and 200 might be short-sighted if gas prices were to rise and Americans, once again, flocked to small vehicles. FCA must have plans to expand the lineup of small SUVs and position them as small-car alternatives in terms of price and fuel efficiency for this strategy to make sense." FCA's latest announcement focuses mainly on the profitable brands and nameplates. There's hardly a mention of Chrysler, Dodge, or Fiat. And future planning is where the plot holes appear. This realignment cuts dead weight from the product portfolio, but FCA's latest announcement focuses mainly on the profitable brands and nameplates. There's hardly a mention of Chrysler, Dodge, or Fiat. So what's Sergio up to? David Sullivan of AutoPacific thinks Marchionne is still looking for another CEO to hug.