2010 Dodge Challenger Se on 2040-cars

Auto blog

Dodge adds fire-breathing Durango SRT for 2018

The playbook for Dodge right now is pretty simple. Wring as much power out of as many things as humanly possible. Now comes the 2018 Dodge Durango SRT. Packing 475 horsepower and 470 pound-feet of torque, this seven-seat school bus will scoot to 60 miles per hour in just 4.4 seconds. Since the latest Durango launched for 2014, Dodge has unabashedly called it a three-row Charger. This beefy SUV makes that aggressive claim even more legit. "It does all the things we want a performance car to do," says Mark Trostle, head of performance, passenger, and utility vehicle exterior design. "It really is our three-row Charger." The 6.4-liter (392 cubic inches) Hemi V8 is considerably stronger than the already-potent 5.7-liter Hemi V8, which is rated at 360 hp and 390 lb-ft in the most powerful Durango available now. The SRT powertrain includes the TorqueFlight eight-speed automatic transmission used in the lesser Durango models (and many other FCA US vehicles), though it's calibrated specifically to the sportier demeanor of the SRT model. A similarly retuned full-time all-wheel-drive system rounds out the powertrain. Despite the fact this is a hot-rod SUV, it can still tow 8,600 pounds with a trailer, 1,200 pounds more than the most capable 2017 Durango (the rear-wheel 5.7-liter variant). View 9 Photos The Durango SRT is an obvious move for Dodge. The Jeep Grand Cherokee, which is built on the same platform in the same factory in Detroit, already has an SRT model. With rumors of a Hellcat-powered Grand Cherokee swirling and another Demonic Challenger on the way, the Durango was overdue for an engine upgrade. "When we launched the Durango in 2014, this is the one we really wanted," says Tim Kuniskis, head of FCA US' passenger car brands. There's no doubt this is an enthusiast-oriented SUV. Dodge even went to the trouble of certifying the Durango SRT's 12.9-second quarter-mile time with the NHRA and tested it a Virginia International Raceway. Buy a Durango SRT, and you get a full day at the Bob Bondurant School of High Performance Driving. When's the last time anyone did all of that with a three-row ute? It certainly looks the part. The hood bulges with new air-ducts to help keep the big Hemi chilled appropriately. There's a new front fascia with more air vents and LED fog lamps. Plus, the grille takes on a menacing new glare with a mesh pattern, and the body gets wider wheel flares. Click through the gallery, it really does look like a Charger from some angles.

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.

McLaren, Koenigsegg, Toyota, Ford, Dodge and Corvette Lego kits announced for 2021

Lego has announced a slew of car-themed sets for 2021. The six kits comprise nine vehicles and fall under the brick pusher's Speed Champion line of official OEM-licensed kits. News of their arrival comes from German toy retailer JB Spielwaren's pre-order listings, which show three single-car sets and three dual-car sets of matched marques. Starting with the McLaren Elva roadster, the kit consists of 263 pieces and is finished in blue. It seems to have a difficult time capturing the curves of the real-life Elva, but there's only so much you can do with a bunch of plastic blocks. Lego has made several other McLaren kits before, including the Senna, 720S, and a more advanced Senna GTR for the Technics line. Next up is the Koenigsegg Jesko, made up of 280 pieces and finished in white. Though the real-life Jesko is still curvy, this kit does a better job of replicating its aggressive maw, vents and cantilevered rear wing. Rounding out the single-car sets is the 299-piece Toyota GR Supra in yellow. This marks the first time Toyota has lent their license to Lego. Again, it struggles a bit to represent the curvy Supra, relying on printed details like logos and headlights to identify. On the other hand, the Chevrolet two-car does a stupendous job with the 1968 Corvette. The C3 is instantly recognizable as such. The C8-R race car it's paired with suffers from the same issues as some of the previous cars, though. The set contains 512 pieces, and funnily enough the C8 driver has short hair while the C3 driver sports a period-correct wavy mane. The next set is a 627-piece Mopar-themed pair, including a purple (Plum Crazy?) 1970 Dodge Challenger T/A and an SRT top fuel dragster. The race car is spot on, but the Challenger was probably tough to make given the width restrictions. It looks a couple of pegs too narrow compared to the wide proportions of the real deal. Last but not least, the Ford set contains a Bronco R and Ford GT Heritage Edition. Consisting of 660 pieces, the set does an excellent job of representing both cars. The GT looks faithful in its Gulf livery, and the Bronco R looks more like a real Bronco than the actual Bronco R race truck. All in all, it's always fun to see more Lego sets with real cars, and we're glad to see more manufacturers added to the roster. The single-car sets are recommended for ages 7 and up, while the double-car sets have an 8 years and up rating. Price in U.S.