2010 Dodge Challenger R/t Coupe 2-door 5.7l on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

Bob Bondurant driving school closes a month after entering Chapter 11

On Oct. 2, the Bob Bondurant School of High Performance Driving filed for Chapter 11 bankruptcy protection. In its filing, the 50-year-old racing school said it owed between 50 and 99 creditors an amount between $1 million and $10 million, and had $1 million to $10 million. The school released a statement at the time saying, "Our plan is to emerge from this process as a stronger company and continue to drive this company into the next 50 years." Instead, on Monday, Nov. 12, the Chandler, Arizona-based facility closed its doors with no official explanation. On top of its classes for aspiring racers, law enforcement authorities, and general population students, Bondurant has been the official driving school for Dodge SRT vehicles since 2015. Over the past two years, Dodge has included a one-day training course for any SRT buyers and lessees, redeemable within a year after finalizing the deal for the vehicle. To read the tale of one Hellcat owner at the Hellcat.org forum, even the school's instructors didn't see the closure coming. Forum member Av62nv arrived at Bondurant Monday to start his four-day experience. After a lengthy pause in the middle of the day, Av62nv wrote that the instructor walked in and told the class, "Sorry guys, don't know how to say this, but as some may know the school is in Chapter 11 bankruptcy, and it looks like 7 now. We are closed." Another poster in the forum, CubeMan, wrote that "Technicians and staff loaded their toolboxes, and paychecks have apparently bounced." Apparently family scion Jason Bondurant arrived and tried to explain; the short of it was that the good thing had come to an abrupt end, but there was "a chance it could come back." Other posters in the forum noted how they have reservations as far out as June 2019, or haven't been able to get to their classes yet because of delivery delays with their SRT cars, and have no idea what's happening. The website is still up, but a Bondurant spokesman confirmed the closure to Classic Cars, and a note on the school door reads, "School is closed. Direct all inquiries to Pat Bondurant." Pat is Bob Bondurant's wife, who married the former race driver in 2010 at the Monaco Grand Prix. A month ago, Bondurant's Chapter 11 bankruptcy statement said, "We will continue operating and serving our students and corporate groups as usual while we develop new business relationships to ensure the vitality of the company in the future." Obviously, that won't happen.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.