2010 Dodge Challenger R/t Coupe 2-door 5.7l on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge restores Brass Monkey wheels to Challenger and Charger SRT Hellcat

For the first part of 2020, Dodge removed the option of its Devils Rim aluminum wheel design in Brass Monkey finish for the Hellcat-powered Challenger and Charger models. Mopar Insiders reports the wheels will return to the menu once Dodge starts production of its two muscle cars again, tidings to please forum members asking why they couldn't order the rims. The standard fit on the regular cars is a 20-inch Low Gloss Black Performance wheel, the options either a 20-inch Machined w/Granite Pocket wheel or a 20-inch Matte Vapor SRT aluminum wheel. On the widebody cars, standard fit is a 20-inch Carbon Black Aluminum wheel, one option being a 20-inch Warp Speed Granite wheel that's the same design as the Matte Vapor but with a different finish. The 20-inch Brass Monkeys are the second option on widebody versions of the Charger Hellcat and Hellcat Redeye, replacing the 20-inch Matte Vapor SRT Aluminum rim available on the non-widebody.   Those choices are on the Dodge configurator. At the time of writing, what's missing from the online tool are the Brass Monkey options for the standard Challengers and the Charger Hellcat Widedody models that MI says are coming. The wider versions of the Challenger Hellcat bolt on a set of 20-inchers that are 11 inches wide; we're told the standard cars will offer Brass Monkey rims in 20 x 9.5 inches. The Charger Hellcat only comes in two widebody versions, so it should get the 20x11-inch Brass Monkey wheels, but the options haven't showed up on the configurator. The sole choices at the moment are the Carbon Black Aluminum and Warp Speed Granite wheels. The other difference to note is that wheres the optional wheels on the Challenger all cost $1,095, the Charger's upgrades cost $1,295. Whenever production begins in Brampton, Ontario, again, the coveted wheels will bring another extra with them: Exterior badges done in a Black and Dark Bronze finish. Related Video:    

2019 Dodge Charger SRT Hellcat Octane Edition fuels your dreams for a limited time

Few automakers love special-edition models quite as much as FCA. It's particularly prevalent in the Jeep and Ram lineups, but other makes get some love, too. Take a look at the new 2019 Dodge Charger SRT Hellcat Octane Edition, a special blacked-out model that's set to arrive at dealerships this fall. The car is available to order now, but Dodge says the books will only be open for a limited amount of time. The Octane Edition is available in two appropriately named colors: Pitch Black and White Knuckle. A pair of matte black stripes run down the middle of the car, flanked on both sides by a thin Octane Red stripe. The 20-inch wheels are painted gloss black and have a knurled bead to keep the tire from slipping on the rim. The Brembo brake package is included, with the six-piston front and four-piston rear calipers painted Octane Red to match the stripes. Inside, the Octane Edition gets houndstooth inserts in the SRT sport seats. There are red Hellcat logos, red seat belts and red stitching on the doors, seats, dash center console and steering wheel. The Octane Package adds $1,495 to the $68,740 base MSRP of a 2019 Charger Hellcat. Like all Hellcat models, the Charger comes with a supercharged 6.2-liter Hemi V8 making 707 horsepower and 650 pound-feet of torque. Power is sent to the rear wheels through an eight-speed automatic. Changes for '19 include a new grille with two inlets to feed more air under the hood. The cars also get launch control, line lock, a cooler for the supercharger as well as a torque reserve system that preloads the supercharger for better launches.