2009 Dodge Challenger Srt8 Coupe 2-door 6.1l One Owner Vehicle Local Trade In on 2040-cars

Auto blog

2021 Dodge Durango to get SRT Hellcat limited edition

In January, spy photographers caught what we thought might be a mild hybrid version of the coming Dodge Durango, based on information Mopar Insiders gleaned from the UAW contract with Fiat Chrysler. Turns out we were correct, Mopar Insiders citing info from sources at Fiat Chrysler that the base engine on the 2021 Durango will be a 3.6-liter Pentastar V6 with eTorque. We don't have output figures yet, but he current Durango's base engine is the non-hybrid 3.6-liter Pentastar V6 making 293 hp and 260 pound-feet of torque in SXT trim. The V6 hybrid powertrain is offered in the Ram 1500 making 305 horsepower and 269 pound-feet of torque, and the Jeep Wrangler making 285 hp and 260 lb-ft., but doesn't increase output compared to the non-hybrid engine in either of those models. We're sure buyers would love for Dodge to bump the numbers up into Ram territory, but the eTorque unit serves the god of fuel economy and low-end refinement, so we shouldn't be surprised if there's no change. The MI report says Dodge has three other powertrains coming for 2021. The 5.7-liter Hemi V8 that comes standard on the Durango RT will carry over, adding eTorque as an option. That's the same standard and optional configuration Ram offers on the 1500 equipped with the 5.7-liter Hemi V8. The Durango's V8 produces 360 hp and 390 lb-ft., versus 395 hp and 410 lb-ft in the Ram. On the Ram, the eTorque system improves fuel economy by 2 mpg in the city, 1 mpg on the highway. The 6.4-liter Hemi V8 on the Durango SRT moves into 2021 as well. But the Durango SRT will need to cede its crown to a Durango SRT Hellcat coming next year. Dodge has already put the Hellcat engine in a Durango Pursuit model for law enforcement, making the full 797-hp wrought by the Hellcat Redeye motor. A couple of months ago, Road & Track caught a Hellcat badge on a Durango in a now-removed trailer for the new "Fast & Furious" film, leading all to believe a civilian-use version of the muscle SUV was on the way. MI claims we'll get the Hellcat's 707 hp and 645 lb-ft., but the trim will launch as a limited edition bearing numbered plaques on the instrument panel.  The only bad news in all this is that production shutdowns have delayed the 2021 Durango and the brand new three-row Jeep Grand Cherokee "at least three months from their original launch dates." Related Video:    

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Marchionne may stay with FCA until 2020

We might get to see Sergio Marchionne and his vast array of sweaters in the auto industry for even longer than expected. The FCA CEO suggested last year that he would retire from the automaker when its current five-year plan was complete in 2018. Now, he has tentatively extended that point out to at least 2020. "I can do this for another five years if you push me, right? Beyond that, I ain't gonna do it, and I don't want to," he said to Automotive News. That would give Marchionne a 16-year career at the top from joining Fiat in 2004 to possibly leaving FCA in 2020. Although, take the CEO's statement with a grain of salt because he has made multiple statements about the timing for his retirement. In 2012, Marchionne said he would only remain in charge until 2015, which is, well, now. Those five years might also go quite quickly because Marchionne is a busy guy with the Ferrari IPO, the attempted merger with General Motors, implementing FCA's five-year plan, and many other projects. He's already considering the next CEO, though. "My purpose in life is to find the Kuniskises of the world, the Manleys, the Biglands, the Palmers," Marchionne said to Automotive News, referencing the heads at Dodge, Jeep, FCA North America, and the company's chief financial officer, respectively. "I told them, 'One of you is going to do what I do one day. I don't know who that is, but one of you is going to do it.'" News Source: Automotive News - sub. req.Image Credit: Paul Sancya / AP Photo Chrysler Dodge Fiat Jeep Sergio Marchionne FCA fca us Mike Manley reid bigland tim kuniskis