2008 Dodge Challenger Srt8 Coupe 2-door 6.1l on 2040-cars

Auto blog

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

Stellantis pledges $2.8 billion investment in Canadian plants

Stellantis has re-upped its commitment to two pivotal Canadian factories. The Brampton Assembly Plant, where the Chrysler 300, Dodge Charger and Dodge Challenger are built, and the Windsor Assembly Plant, where the Chrysler Pacifica minivan is made, will receive a $2.8 million investment in the coming years.  The announcement came as welcome news for Brampton, as the plant's future was very much in doubt. The company had only promised to build the three models, sharing an aged platform, through 2023. Now the future is more clear. Stellantis will begin retooling the facility in 2024 once production of the muscle car trio winds down. When it comes back online in 2025, it will produce "at least one all-new electric model". It will also serve as the production facility for an all-new flexible architecture, but which models it will support were not disclosed. As for Windsor, retooling will begin in 2023. Stellantis didn't say when it would finish, but that it would be home to a "new multi-energy vehicle (MEV) architecture that will provide battery-electric (BEV) capability for multiple models." Both plants are expected to return to a three-shift schedule after layoffs at the plants dropped them down to two shifts. The reaffirmation of investment in Canada follows last month's announcement that Stellantis and LG Energy Solution would establish a $4.1 billion joint venture to make battery packs for electric vehicles. The project is being billed as Canada's first large-scale lithium-ion battery plant. In addition, Windsor's Automotive Research and Development Centre (ARDC) will now become North America's first battery lab. Stellantis is expanding the site by 100,000 square feet, where engineers will conduct R&D into BEV, PHEV and HEV cells, modules and battery packs. Stellantis North America Chief Operating Officer Mark Stewart said, "These investments reaffirm our long-term commitment to Canada and represent an important step as we move toward zero-emission vehicles that deliver on our customers’ desire for innovative, clean, safe and affordable mobility.”  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.