1974 Dodge Challenger Rally All Numbers Matching 318 Auto Fe5 Red Build Sheet on 2040-cars

Auto blog

Takata adds millions to recall expansion in US [UPDATE]

UPDATE: Ford spokesperson Kelli Felker has advised Autoblog that of the 1,509,535 total vehicles worldwide that the company is recalling, 966,504 of them are new additions for this expanded safety campaign. Last week, the National Highway Traffic Safety Administration announced that the Takata airbag inflator recalls would expand to an estimated 33.8 million vehicles in the US. However at the time, automakers weren't sure specifically which of their models might be affected under this enlarged campaign. Now, the numbers for BMW, FCA, Ford, and Mitsubishi are being released by the agency. Additionally, Honda is outlining the broadening of its own campaign. BMW's recall amounts to 420,661 vehicles in the US, an increase from 140,696 previously. All of the following models need their front, driver's side airbag replaced: 2002-2005 BMW 325i/325xi/330i/330xi Sedan 2002-2005 BMW 325xi/325i Sportswagon 2002-2006 BMW 330Ci/325Ci/M3 Convertible 2002-2006 BMW 325i/330i/M3 Coupe 2002-2003 BMW M5/540i/525i/530i Sedan 2002-2003 BMW 540i/525i Sportswagon 2003-2004 BMW X5 3.0i/4.4i BMW has received no reports of any injures or deaths from this problem in its vehicles. FCA has 5,224,845 vehicles globally in need of inflator replacements, according to its statement. However, the company is only aware of one injury related to the issue, which occurred in a 2006 Dodge Charger in southern Florida. There are 4,747,202 vehicles worldwide from the company that are affected on the front, driver's side. Among these, 4,066,732 are in the US, 374,508 are in Canada, and the rest are in other countries. The models are: 2005-2009 Dodge Ram 2500 Pickup 2004-2008 Dodge Ram 1500 Pickup 2006-2009 Dodge Ram 3500 Pickup 2007-2009 Dodge Ram 3500 Cab Chassis 2008-2010 Dodge Ram 4500/5500 Cab Chassis 2008-2009 Sterling 4500/5500 Cab Chassis 2004-2008 Dodge Durango 2007-2008 Chrysler Aspen 2005-2010 Chrysler 300/300C/SRT8 2005-2010 Dodge Charger/Magnum 2005-2011 Dodge Dakota 2006-2010 Mitsubishi Raider Also, there are 438,156 vehicles in the US, according to the NHTSA documents, that need their front passenger's side inflators replaced in the expansion of an earlier regional recall: 2003 Dodge Ram 1500 2003 Dodge Ram 2500 2003 Dodge Ram 3500 The total number of vehicles from Ford now covered under these campaigns stands at 1,509,535 worldwide. Of this total, there are 1,380,604 in the United States, 93,207 in Canada and 16,953 in Mexico.

Junkyard Gem: 1964 Dodge Dart station wagon

The Chrysler A Platform, built from the 1960 through 1976 model years for the North American market (and for a few years beyond that in Australia and Latin America), was one of Chrysler's greatest hits, if not the greatest hit. We know these cars best as the 1963-1976 Dodge Dart and the 1960-1976 Plymouth Valiant, and they established a reputation for reliability matched only by the likes of the Mercedes-Benz W123 diesel. I still see many of these cars during my junkyard wanderings, but A-Body wagons have become very rare. Here's a tattered '64 Dart wagon that I spotted in a self-service wrecking yard in San Jose, California. 1964 was the first model year for factory-installed V8 engines in the Dart and Valiant (and the Valiant's sporty sibling, the Barracuda), and the 273-cubic-inch pushrod V8 was a sturdy powerplant indeed. The slant-6 engine, though less powerful, went into most of these cars, and for good reason: It was harder to kill than all the world's cockroaches and rats put together. This car would have come with a 170- or 225-cubic-inch version of the slant-6, optimistically rated at either 101 or 145 gross horsepower (probably about 55 horses at the wheels), but I didn't feel like scraping sludge off casting numbers to see if it's on its first or 11th engine. In any case, slant-6 Darts were on the pokey side but would get you to your destination every time. This one has a lot of rust for a California car (in New Hampshire or Wisconsin, it would be considered pretty solid) and the interior is more or less obliterated, so even dedicated station-wagon lovers wouldn't have been motivated to take it on as a restoration project. So another early Dart is poised to be stuffed into The Crusher, for reasons that make good economic sense. This still makes us sad, though. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Here's the compact you've been waiting for!

Dodge Journey to get a performance-focused replacement in 2022?

The Dodge Journey is neither fast nor agile, but it has proved a hard-to-hit target for everyone trying to figure out what the next generation will hold, including Fiat Chrysler. In 2014, the automaker's five-year plan for Dodge included an all-new Journey in 2016, and a hotted-up SRT version of the crossover come 2017. In 2016, "supplier sources" told Automotive News a new Journey on rear-drive Alfa Romeo's Giorgio platform would show for the 2019 model year, and production would be moved from Mexico to Italy, Those prognostications came to naught, the 11-year-old Journey riding on its Mitsubishi-based platform into 2020 with fewer options. Now Mopar Insiders says the next-gen Journey could come in 2022 as an early 2023 model, still on the Giorgio platform and given a performance-focused brief. According to MI, the new Journey — and it's not clear if the name will be retained — comes in strict two-row, five-seater guise. It "will be around the size of the Stelvio," the Alfa Romeo coming in at 184.5 inches. Previous reports have said the Journey will be shorter than the current 192.4-inch model, but longer than the Stelvio. The Dodge Charger is said to donate major styling cues, and there will supposedly be a Scat Pack trim. Under the hood, the entry-level engine will be the same GME 2.0-liter four-cylinder in that makes 276 horsepower and 306 pound-feet of torque in the Stelvio. MI believes a Hemi V8 will make the options list, hence the Scat Pack. Previously, other outlets have figured a turbo V6 like that in the Alfa Quadrifoglio models will stand in as the upgrade, although the model is "being developed with V8s in mind." Any engine choice is expected to be paired with an eight-speed transmission. All of those options far outdo the 2.4-liter four-cylinder with 172 hp and 165 lb-ft, shifting through a four-speed automatic, which is the only powertrain possible for the 2020 Journey. The platform switch and the change to rear-drive will greatly enhance on-road manners and performance, but MI believes an all-wheel-drive option should make the transition. If Journey production moves to Italy from Mexico, Fiat Chrysler will open up capacity in North America for big-profit crossovers and trucks, and get more from its underutilized European operations. Rumor says the Journey would roll down the same lines as the Stelvio in the Cassino Assembly Plant; the crossover is still sold in Europe and other markets as the Fiat Freemont.