1971 Dodge Challenger on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

2020 Ford Police Interceptor Utility dominates Michigan State Police testing

The Michigan State Police has released its preliminary findings from testing the 2019 crop of police vehicles, and the results are a bit surprising. The consistent top performer of the bunch was the 2020 Ford Police Interceptor Utility, better known to civilians as the Ford Explorer. Specifically, the top performer was the model with the new turbocharged 3.0-liter V6. The Michigan State Police conducts acceleration, top speed, braking and lap time tests of all the available police vehicles. The 3.0-liter Police Interceptor Utility was the fastest to 60 mph at 5.77 seconds, had the highest top speed of 150 mph, and the best average lap time of 1:36.47. The lap time was particularly impressive as it was just over half a second faster than the next quickest car, the all-wheel-drive V8 Charger. View 13 Photos Still, the 2019 Dodge Charger gave the Explorer a serious run for its money. The all-wheel-drive V8 Charger was only 0.1 seconds behind the Explorer to 60 mph with a time of 5.87 seconds, and the rear-drive version was third quickest at 6.15 seconds. Both V8 Chargers were only 1 mph off of the Explorer's top speed, and the V6 example was third fastest at 141 mph. We already mentioned the all-wheel-drive V8 Charger was half a second off the Explorer's lap time, and the rear-drive variant was just over 1 second behind, giving it the third fastest average time. Dodge also took home braking bragging rights. The V6 Charger won out with a distance of 126.9 feet, followed by the rear-drive V8 Charger with 128 feet, and the V6 Durango Pursuit stopping at 128.8 feet. Now of course where there are winners, there are also losers. The slowest accelerating police car was the Ford Police Responder Hybrid Sedan, better known as the Fusion Hybrid, with a time of 9.24 seconds. At 8.59 seconds was the V6 Dodge Durango, and the V8 Chevy Tahoe with four-wheel-drive was third slowest at 7.98 seconds. Lowest top speed was 106 mph with the Ford F-150 Police Responder with the 3.5-liter turbocharged V6, followed by the V6 and V8 Durangos with 117- and 118-mph top speeds respectively. In braking, the Chevy Tahoes performed the worst with the rear-drive version stopping at 145.7 feet and the four-wheel-drive version stopping at 142.5 feet. The F-150 followed with 141.9 feet. When it came to lap times, the Fusion Hybrid lapped the slowest with a time of 1:46.31. The V6 Durango was about a second faster with a time of 1:45.45.