Very Clean 7 Passenger Grand Caravan Rear Entertainment Clean Carfax Cold Air on 2040-cars

Auto blog

Dodge Durango SRT Pursuit packs the 797-horsepower Hellcat Redeye engine

When the Jeep Grand Cherokee SRT Trackhawk launched we were stunned that it featured both the 707-horsepower Hellcat engine and all-wheel drive. But SRT has one-upped itself with a custom Durango for the One Lap of America motorsports event. It's called the Dodge Durango SRT Pursuit — nicknamed "Speed Trap" — and it has the 797-horsepower Hellcat Redeye engine, and it still has all-wheel drive! Besides the 90-horsepower advantage over the stock Trackhawk, the Durango SRT Pursuit race SUV gets improved handling via concept lowering springs and 11-inch wide wheels with 305-mm wide tires that are shared with the Challenger Hellcat Widebody. It has improved stopping ability from 15.75-inch brake rotors up front with 6-piston calipers, and 13.78-inch rotors with four-piston calipers. This is the same kind of setup as the Trackhawk uses. Oddly enough, Dodge left the factory heated and cooled front seats, but removed the two rear rows of seats for weight savings. The Durango also gets a roll cage and racing harness. The finishing touches include a cat-back exhaust and the low-profile police light bar and paint scheme. Now before you ask, there don't appear to be plans to put a Redeye-powered Durango into production. With that being said, the company clearly has the capability to mate that engine to an all-wheel-drive system, and it would be hard to imagine the company not capitalizing on that. Even if the powertrain didn't make it to a Durango, it would seem like a great complement to the existing Grand Cherokee Trackhawk, or even an updated version of it. Hint, hint, wink, wink, FCA. Related Video:

FCA UConnect fiasco could set over-the-air updates back years

Since cars have become more software dependent, most major automakers have been inching toward enabling over-the-air updates to keep vehicle electronics, ranging from infotainment systems to safety features, current. But there are only two car companies — Fiat Chrysler and Ford —± currently doing OTA updates, and on a limited basis. GM CEO Mary Barra announced last summer that the automaker will launch a new EV architecture and infotainment system capable of over-the-air updates "before 2020." The one exception, per usual, is Tesla. Since the release of the Model S almost six years ago, the maverick EV automaker has made routine OTA software updates a core part of its vehicle platforms and value proposition, and has sent out updates for everything from adjusting ride height to enabling Autopilot, largely without incident. When I've asked automakers why they can't do the same thing, I've heard reasons ranging from running afoul of their dealers (and archiac regulation) to security concerns. Automakers like Ford and General Motors say they want to act like tech companies, which routinely send out OTA updates for a wide range of devices, but overall the car industry still moves at a very cautious snail's pace. And when automakers do try to move faster and take more risks — unlike with a smartphone update, which people bitch about but live with — the consequences can be significant when things go wrong. That's the case with Fiat Chrysler America and its recent public-relations nightmare when an OTA update went awry. The update went out at the end of last week for the Uconnect system in late-model vehicles, and it made head units go into a near continuous reboot, which caused owners to not only lose access to entertainment features, but also critical functions like emergency assistance. Almost immediately, owners took to Twitter to express outrage, and FCA was caught flatfooted. A tweet went out on Monday on the UconnectCares Twitter account that read, "Certain 2017 & 2018 Uconnect systems may experience a reboot every 45-60 seconds. Our Engineering teams are investigating the cause and working towards a resolution.

Dodge could resurrect the ACR nameplate on a track-hungry Challenger

Dodge will reportedly celebrate the Challenger's 50th birthday by introducing a track-focused variant of the coupe that will resurrect the American Club Racer (ACR) nameplate. It will arrive as a cocktail of the automaker's best race-bred parts, including bits and pieces sourced from the defunct Viper. The Challenger ACR will be presented as a follow-up to the sold-out Challenger Demon available during the 2018 model year. While Dodge developed the 840-horsepower Demon for drag racing, it's designing the ACR to tackle America's windiest road courses, according to anonymous sources who spoke to website Mopar Insiders. It will need to take a turn, not just go really fast in a straight line. To that end, Dodge will give its popular muscle car more downforce by adding a full body kit that will include a huge adjustable rear wing shaped like the one fitted to the Viper ACR. The racer will be based on the Widebody variant of the Challenger, which handles considerably better than its narrow-bodied sibling, and it will rely on composite materials like carbon fiber to keep weight in check. In other words, it will receive more extreme modifications than the Challenger SRT8 ACR that Dodge introduced during the 2011 SEMA show but never approved for production. If this configuration sounds familiar, it's likely because the carmaker sponsors an independent team named Wesley Motorsports, which races a Hellcat Redeye all over America. It features an adjustable suspension provided by Blistein, slick Toyo tires, and a supercharged, 797-horsepower V8. The Challenger ACR described by Mopar Insiders sounds a lot like the one Wesley Motorsports regularly enters in hill climbs and time attack competitions (pictured). Coincidence? It's too early to tell for sure. Dodge hasn't commented on the report, and it hasn't announced what it has in store for the Challenger's 50th anniversary. The original Challenger made its debut in late 1969, and it arrived in showrooms during the 1970 model year, so Dodge will need to unwrap its surprise before the start of the 2021 model year to keep it timely. Expect an announcement during the first half of 2020. While pricing information remains a mystery, Mopar Insiders added the Challenger ACR will come standard with only a driver's sat. Buyers will be able to add a passenger seat for $1.