2013 Black Se Handicap Wheelchair Van Rear Entry! on 2040-cars

Auto blog

Chrysler Group moves around execs in wake of recent departure

Chrysler is busy shuffling executives around in the wake of Ram head Fred Diaz's departure. The automaker has named Reid Bigland (pictured, right) as Diaz's successor in the role of president and CEO of Ram, though Bigland will continue his duties as the head of US sales and the president and CEO of Chrysler Canada. Bigland first came to Chrysler in 2006 from Freightliner Custom Chassis Corporation, so the guy knows a thing or two about trucks.
Meanwhile, Timothy Kuniskis will take over as president and CEO of Dodge. Previously, he served as the head of Fiat in North America and has been with Chrysler in one capacity or another since 1992. His old title now falls to Jason Stoicevich, who will also continue to work as the director of the automaker's California Business Center. Finally, Bruno Cattori will take over as the president and CEO of Chrysler Mexico.
Diaz left his position to take over as a divisional vice president of sales and marketing with Nissan. You can read the full press release on the Chrysler personnel changes below for more information.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Some dealers asking $100,000-plus for Daytona-edition Dodge Charger SRT Hellcats

If you thought the name of the 2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition was a lot to swallow, then you're definitely going to choke on what some dealers are asking for the privilege of owning one. The $4,495 package is commanding as much as $25,000 in "market adjustments" from stores looking to capitalize on the rarity of this extremely limited-edition model.  The folks over at Moparinsiders.com reported Friday that some dealers are asking Demon-level prices for their limited allocations of the commemorative package. Their assessment? Not worth it. We're inclined to agree.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a set of stickers, a dash plaque and a tiny bump in horsepower. What you really get for your money is exclusivity. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers. The other 50 were reserved for Canada.  To be fair, no variant of the 2020 Charger SRT Hellcat Widebody even approaches the definition of "inexpensive." Just to get behind the wheel of the newest edition to the Charger lineup will set you back at least $71,000. The Widebody package is more than just a set of custom fenders. The Hellcat also gets another 1.6 inches of track width and some extra rubber on the road. SRT engineers also increased the Hellcat’s front spring rate by 32% and beefed up its sway bars (from 19 mm to 21.7 mm in the front and from 32 mm to 34 mm in the rear). The adaptive suspension was firmed up a little bit across the board too for crisper response over road imperfections. Plus, you know, there's that 707-horsepower, supercharged, 6.2-liter engine. The Daytona gets an extra 10 ponies, right? Well, sort of, anyway. SRT rated its output at a slightly higher engine speed. Between us, it's the same thing.  So, there's a silver lining: You don't have to spend $100,000 for a 2020 Charger Widebody Hellcat if you don't want to, but somebody probably will.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.