2008 Dodge Caliber 5 Speed - 55k Miles on 2040-cars

Auto blog

Dodge could return to NASCAR, Marchionne says

Fiat Chrysler Automobiles CEO Sergio Marchionne said he'd "love to" bring Dodge back to NASCAR. The news could signal a potential shift in America's favorite motorsport away from today's three-manufacturer arrangement, but we're wondering just how much sense Dodge's return would make amid NASCAR's dwindling television ratings and attendance figures. It took a visit from Ferrari at NASCAR's biggest icon, Daytona International Speedway, for the Ferrari Challenge World Finals to get Marchionne on the subject of Dodge and stock car racing. When asked about the possibility on Sunday, the FCA boss revealed he'd just spoken to NASCAR executive vice president Jim France the night before about Dodge's return. Dodge announced its NASCAR departure in 2009, as it was in the grips of a major bankruptcy alongside cross-town rival General Motors. While GM's Chevrolet brand stuck it out and won three of the last four manufacturer championships, the final Mopar-powered team flipped to Ford in 2012. Marchionne takes the blame for the decision, citing reasons that are, frankly, very good. "I am the guilty party at the table. In 2009 we came out of bankruptcy; we couldn't [justify] racing in NASCAR when I was trying to pay bills and make payroll," Marchionne said, according to Autoweek. "I think we're in a different place now." NASCAR is in a different place, too. The sport has struggled with disappointing television ratings in the past several years, and it's not uncommon to tune into races at some of the sport's marquee tracks, like Bristol Motor Speedway, and see scores of empty seats. Sponsorship dollars are also drying up. That could explain Marchionne's non-committal follow-up comments. "We need to find the right way to come back in," Marchionne said, adding that he'd revisit the idea with Jim France and International Speedway Corporation CEO and NASCAR board member Lesa France Kennedy "in short order." Related Video:

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.