4dr Sedan Se New Automatic Gasoline 2.4l 4 Cyl Engine Bright White Clear Coat on 2040-cars

Auto blog

2013 Dodge Challenger V6 recalled for fire risk, owners asked not to drive

Chrysler has issued a recall for the V6 version of the 2013 Dodge Challenger (as pictured above in 2012MY) over the possibility of a wiring harness that could short circuit and lead to a fire. Owners of these V6 Challengers built from November 2012 through January 2013 are being urged to contact dealers immediately and, in the meantime, not to drive their cars or park in or near any buildings.
Chrysler estimates around 2,500 potentially affected Challengers are in owners' hands, while another 1,900 are still sitting on dealer lots. The total number of recalled vehicles is 4,459.
So far, Chrysler says that seven fires have been reported - none resulting in injuries. The company is instructing vehicle owners to contact their dealer to find out if their vehicle is included in the recall, but owners can also find the build date information of their vehicle by checking the label in the driver's door jamb.

2020 Dodge Charger Widebody First Drive Review | Wider is better

NAPA VALLEY, Calif. - The guy in the white Silverado is already pissed off. He didn’t appreciate the first two times we blazed the rear tires of this 2020 Dodge Charger Widebody Hellcat through three gears, so we might as well do it again. ThatÂ’s right, sir, we are number one. Dodge seems to be playing by a different set of rules than the rest of the industry. While everyone else is worried about small crossovers and CAFE regulations, miles per gallon and electrification, autonomy and Elon Musk, the gang at Dodge is building AmericaÂ’s best muscle cars ever. Unapologetic, loud, in your face, tire-smoking muscle cars. Hellcats, Demons, Scat Packs and Redeyes. For 2020, the brandÂ’s list of Hemi-powered, rear-wheel-drive tire fryers now includes Widebody versions of the Charger Scat Pack and Hellcat, borrowing parts and inspiration from Widebody Challenger models, which began showing up for 2018. Dodge will also offer the 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition to commemorate the 1969 Charger Daytona, a NASCAR homologation special with special aerodynamics for the superspeedways, including a massive rear wing and pointed beak with pop up headlamps. 2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary View 14 Photos Just 501 will be sold, the same number of Daytonas Dodge had to build back in the day to satisfy Big Bill France. ItÂ’s available in four colors, and for 2020, itÂ’s the only Charger to wear B5 Blue, which was also originally offered in 1969. ItÂ’s a favorite color of classic Mopar muscle car enthusiasts. “Customers said we were giving too much love to the Challenger and ignoring the Charger,” said Jeff Strauss, the senior manager of Dodge/SRT Sales Operations. “ThatÂ’s not the case anymore.” The Widebody Package will be optional on the Charger Scat Pack (the white car in the above photos), but itÂ’s standard equipment on every 2020 Charger Hellcat and only adds about 30 pounds to the car. Just as on the Widebody Challenger, the plastic wheelwell flares widen the sedan's 3.5 inches, and their wider 20x11-inch forged aluminum wheels wear massive 305/35ZR20 tires front and rear. All-seasons are standard, but the cars are best on the available Pirelli Summer tires. There are also new front and rear fascias, rocker trim and a reshaped rear spoiler.  “My main goal was to make the cars look bad ass,” said Mark Trostle, FCAÂ’s head of performance, passenger and utility vehicle design.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.