2014 Chrysler Town & Country Touring L on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Fiat-Chrysler CEO: Please Don't Buy The Fiat 500e

Fiat-Chrysler's CEO had a strange request for electric vehicle shoppers on Wednesday: don't buy the all-electric Fiat 500e. While CEO Sergio Marchionne was speaking at a conference in Washington, he told the crowd he's tired of Chrysler-Fiat losing money, The Detroit News reported. "I hope you don't buy it [the 500e] because every time I sell one it costs me $14,000," he said to the audience at the Brookings Institution. "I'm honest enough to tell you that." Marchionne said federal and state fuel efficiency mandates are forcing the automaker to build unprofitable cars, according to Reuters. A normal Fiat 500 starts at $16,195, and the 500e starts at $32,650, before federal and state tax credits. There are no sales data to indicate how the 500e is performing. Related Gallery The Best Hybrids For The Money View 12 Photos Green Chrysler Fiat Car Buying Electric fiat 500e

Junkyard Gem: 1986 Plymouth Horizon

Chrysler imported quite a few Mitsubishis and sold them as Dodge and Plymouth Colts, but the Colts of the 1980s had to compete with the Plymouth Horizon and its Dodge Omni sibling. Based on a Chrysler Europe design, production of the Plymouth Horizon ran in virtually unchanged form from the 1979 through 1990 model years. A simple, cheap econobox, the Plymouth Horizon sold well enough, but was such a disposable car that very few remain today. Here's one that lasted long enough to end its days in a California wrecking yard at age 31. The genealogy of the Omnirizon gets a bit tangled when you go back far enough; the car is based on the chassis design of the 1975 Simca 1307, though by the time it got to Detroit it had evolved considerably. Chrysler was desperate for an American-built economy car during the late 1970s, and the Omnirizon got the job done. The 1978-1982 Horizons had 1.7-liter Volkswagen engines, while the 1983-1986 models came with a 1.6-liter Simca mill as the base engine. The Chrysler 2.2-liter four was an optional Horizon powerplant starting in 1981, and the only engine available from 1987 through the final Horizons built in 1990. This car has the 2.2, rated at 96 horses in 1986. The '86 Horizon weighed a mere 2,100 pounds (about the same as a 2017 Mitsubishi Mirage), and so 96 horsepower made it peppy enough by mid-1980s econo-commuter standards. The interior is right out of the Slippery Plastic With Fake Stitching™ playbook, but nobody bought an Omnirizon for the luxury. This car was basically identical to its Dodge Omni sibling, and both had MSRPs of $6,209 in 1986 (about $13,900 in inflation-adjusted 2017 bucks). You could get cheaper new cars in 1986— the $4,995 Hyundai Excel and $3,990 Yugo GV come to mind— but the Omnirizon five-doors were better-built and had the sales advantage of being known quantities. Even by 1986, the Omnirizon was showing its age (though not as much as the amusingly obsolete Chevrolet Chevette, which was sold through the 1987 model year). Still, it remained sufficiently relevant to sell in decent number for another four years. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The pride is back! Featured Gallery Junked 1986 Plymouth Horizon View 14 Photos Auto News Chrysler Hatchback Classics