2010 Chrysler Town & Country Touring Plus Nav Dvd 20k!! Texas Direct Auto on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

FCA to pay buyers $1,700 to swap out of scandal-mired VWs

FCA is trying to gain some sales from arch-rival VW in the competitive European market by offering potential buyers in Italy up to $1,700 to swap into an FCA group car. While the promotion isn't specifically targeted at TDI owners affected by the emissions scandal, it is clearly intended to turn dissatisfaction with VW's defeat device cheat into additional sales, Bloomberg reports. The 500-1,500 euro incentive (roughly $560-1,700, depending on vehicle) stacks on top of any other rebates or deals applicable, and applies if a buyer brings in any of Volkswagen Group's cars – including Audi, Skoda, and SEAT, among (many) others. As Bloomberg notes, it's normal for automakers to offer "conquest" deals – giving a buyer cash for trading in a competitor's vehicle. Those deals aren't usually limited to one company's products, however; FCA's program looks specifically to take advantage of VW's legal and public relations nightmare. FCA isn't the only automaker trying this trick in Italy. Automotive News Europe also reported that Ford is offering approximately $840 in incentives across its entire range to owners of VW vehicles seeking to trade in for a Ford. No word of yet as to whether these incentives will spread beyond Italy or to other automakers.Related Video:

Fiat Chrysler plans to speed up its product development

Fiat Chrysler is streamlining its global product development process in a bid to bring new or updated models to showrooms more quickly, reflecting heightened consumer expectations but also massive technological upheavals brought by things like electric vehicles, self-driving cars and ever more strident safety regulations. FCA recently announced plans to flatten its corporate product development structure across its global properties to reduce complexity, speed decision making and get products to the market faster than the years it can take today. It's similar to what Jim Hackett has been trying to do across town at Ford. FCA Chief Technology Officer Harald Wester, who is also executive chairman of Maserati, will oversee the reorganized product development unit. The company says it has already committed ˆ9 billion — nearly $10 billion at current exchange rates — toward its five-year plan to launch 30 new electrified nameplates globally, with plug-in hybrid versions of the Jeep Compass, Renegade and Wrangler due up first along with a full-electric Fiat car and commercial van. Maserati has also received a ˆ1.6 billion investment to bring about hybrid and battery-electric powertrains, plus Level 3 autonomous capabilities. “The industry has never experienced technological change at the pace we are now seeing,” CEO Mike Manley said in a statement. “So, weÂ’re unleashing the creative energy of our engineers and technical experts for the benefit of our customers and stakeholders worldwide.” One of the biggest changes is integrating powertrain and vehicle engineering, previously separate units, in a global process involving more collaboration and better deployment of resources. Engineering will also be supported by five centers of technical competence, including groups that will develop electronic architectures and another focused on advanced technologies. FCA says product development has previously been served by several different organizations that operated as regional sub-groups or standalone units. Left unmentioned is whether the merger with PSA Group, which will reportedly result in nearly 70 percent of all models produced by the two brands moving to just two PSA platforms, is helping to push the timeline on these changes. FCA is also making greater use of the Alfa Romeo Giorgio platform, planning it for the next-generation Jeep Grand Cherokee.