2001 Chrysler Pt Cruiser 122,861 Miles Have Key Starts & Runs With A Jump on 2040-cars

Auto blog

26k Chrysler 200 models recalled over parking woes

Chrysler is recalling nearly 26,000 of its 2015 200 sedans after customers reported that cars aren't shifting into park. Only vehicles equipped with the 3.6-liter V6 are affected by the recall, which includes both front-drive and all-wheel-drive models (which could represent as much as 20 percent of the recalled vehicles). The roughly 26,000 vehicles were built between March 17, 2014 and September 20, 2014. As for where those vehicles can be found, 22,107 were sold in the United States. The remaining vehicles went to Canada and Mexico, with 3,600 in the former and 213 in the latter. Chrysler is blaming the recall on "inconsistent assembly procedures" at a supplier's factory, and will replace the transmissions of any vehicles affected by the defect. Owners of V6-powered 200s are being told to use their parking brake in addition to shifting into park. Although five incidents have been reported, FCA isn't aware of any injuries or accidents. Scroll down for the brief press release. Statement: Park Engagement February 26, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a recall of certain model-year 2015 cars to resolve manufacturing issues that may prevent the vehicles from shifting into park. Inconsistent assembly procedures at a supplier's plant have been linked to five reports involving customers who could not shift their vehicles into park. Without park, a vehicle may be subject to inadvertent movement. FCA US is unaware of any related injuries or accidents. The campaign is limited to the Chrysler 200 equipped with a V-6 engine. There are an estimated 22,107 in the U.S.; 3,600 in Canada and 213 in Mexico. Customers will be advised when they may schedule service. FCA US dealers will inspect and, if required, replace transmissions at no charge. In the interim, customers who own models with V-6 engines are advised to activate the vehicle's parking brake before shutting off its engine, because the shifter may incorrectly indicate park is engaged. Customers with additional concerns may call 1-800-853-1403. Related Video:

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Fiat Chrysler completes sale of Magneti Marelli

Fiat Chrysler Automobiles completed its sale of components maker Magneti Marelli to CK Holdings Co., Ltd., the holding company of Calsonic Kansei Corporation. The Japanese parts supplier paid $6.5 billion (5.8 billion euros), which is a bit less than the $7.1 billion deal that was initially announced in October of 2018. According to Reuters, the price was adjusted based on Magneti Marelli's estimated financial position as of the closing date. The influx of cash allowed FCA to offer a special cash distribution to its shareholders for the first time in a decade. At ˆ1.30 per share, the payout corresponds to a total distribution of approximately ˆ2 billion. The dividend will pay out on May 30. "FCA remains committed to Magneti Marelli, with the new company continuing as a key supplier," FCA CEO Mike Manley said in a statement. "This sale also recognizes the full strategic value of Magneti Marelli, improving our financial position, delivering value to our shareholders and allowing us to enhance our focus on our core product portfolio." Earnings/Financials Chrysler Fiat magneti marelli