06 Red Turbo 2.4l I4 Automatic Convertible *cd Changer *leather Seats *one Owner on 2040-cars

Auto blog

Junkyard Gem: 1964 Plymouth Valiant V-200 Wagon

When Chrysler introduced the Valiant for the 1960 model year, the automotive world had no idea that this new compact would become one of the most successful products in the company's history. Valiants and its A-Body siblings were built and sold by the millions around the world, with production continuing into the early 1980s (in Australia and South America). The sales pinnacle for the Valiant in the U.S. was 1964, and today's Junkyard Gem is one of those cars: an upscale V-200 station wagon, found in a Denver-area wrecking yard a few weeks back. The Valiant began life as its own marque, became a Plymouth for 1961, left Plymouth for 1962, then returned as a Plymouth model until American Valiant production ceased in 1976, and the Volare took its place. You'll barely see any mention of the Plymouth brand in the 1964 Valiant brochure, and Plymouth badging on the '64s was minimal. You could get the 1964 Valiant wagon as the base V-100, starting at $2,273, or as the nicer V-200 with its $2,388 price tag (that's about $21,150 and $22,220 in 2022 dollars). Valiant coupes and convertibles could be had with the even swankier (by cheap small-car standards) Signet trim level. As Ford showed us in the middle 2000s, numbers are just classier if you spell them out on emblems. In the middle 1960s, substituting an automatic for the base three-on-the-tree column-shift manual transmission jacked up the price of an affordable car by an eye-watering amount. The Torqueflite three-speed automatic and its slick-looking push-button shifter cost 172 bucks extra (around $1,600 today), which made the car more than 7% costlier. A four-on-the-floor manual was available for the first time in a new Valiant that year, but it cost $180. Also new for the 1964 Valiant was a V8 option (a 273-cubic-incher rated at 180 horsepower), but this car has the good old Slant-6. If it's the engine that came with the car when it rolled off the assembly line, it's a 101-horse example with 170 cubic inches… but these cars are notorious for getting engine swaps early and often and I didn't check the block casting numbers. The cassette deck tells us that it was being driven as recently as the late 1980s through middle 1990s. There's some rust in the usual spots, about what this car would have acquired by 1967 if it had stayed in Michigan. This car could have been restored, though the expense for rust repair and interior refurbishment wouldn't have been a good investment from a financial standpoint.

NHTSA, IIHS, and 20 automakers to make auto braking standard by 2022

The National Highway Traffic Safety Administration, the Insurance Institute for Highway Safety and virtually every automaker in the US domestic market have announced a pact to make automatic emergency braking standard by 2022. Here's the full rundown of companies involved: BMW, Fiat Chrysler Automobiles, Ford, General Motors, Honda, Hyundai, Jaguar Land Rover, Kia, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Subaru, Tesla, Toyota, Volkswagen, and Volvo (not to mention the brands that fall under each automaker's respective umbrella). Like we reported yesterday, AEB will be as ubiquitous in the future as traction and stability control are today. But the thing to note here is that this is not a governmental mandate. It's truly an agreement between automakers and the government, a fact that NHTSA claims will lead to widespread adoption three years sooner than a formal rule. That fact in itself should prevent up to 28,000 crashes and 12,000 injuries. The agreement will come into effect in two waves. For the majority of vehicles on the road – those with gross vehicle weights below 8,500 pounds – AEB will need to be standard equipment by September 1, 2022. Vehicles between 8,501 and 10,000 pounds will have an extra three years to offer AEB. "It's an exciting time for vehicle safety. By proactively making emergency braking systems standard equipment on their vehicles, these 20 automakers will help prevent thousands of crashes and save lives," said Secretary of Transportation Anthony Foxx said in an official statement. "It's a win for safety and a win for consumers." Read on for the official press release from NHTSA. Related Video: U.S. DOT and IIHS announce historic commitment of 20 automakers to make automatic emergency braking standard on new vehicles McLEAN, Va. – The U.S. Department of Transportation's National Highway Traffic Safety Administration and the Insurance Institute for Highway Safety announced today a historic commitment by 20 automakers representing more than 99 percent of the U.S. auto market to make automatic emergency braking a standard feature on virtually all new cars no later than NHTSA's 2022 reporting year, which begins Sept 1, 2022. Automakers making the commitment are Audi, BMW, FCA US LLC, Ford, General Motors, Honda, Hyundai, Jaguar Land Rover, Kia, Maserati, Mazda, Mercedes-Benz, Mitsubishi Motors, Nissan, Porsche, Subaru, Tesla Motors Inc., Toyota, Volkswagen and Volvo Car USA.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.